CISCO-RF-SUPPLEMENTAL-MIB

CISCO-RF-SUPPLEMENTAL-MIB Download

MIBs list

This MIB was designed to complement the CISCO-RF-MIB by providing additional optional status and configuration control for redundant CPU platforms. However, the MIB should also be applicable to redundant platforms which don't use the RF Redundancy Framework software since it makes no direct references to any CISCO-RF-MIB objects or textual conventions and no direct reference to any RF states, RF events or internal information.

IPHost Network Monitor offer an easy way of SNMP monitoring your Cisco Servers, Routers, Switches, Bridges, Firewalls, Repeaters.

OID list for CISCO-RF-SUPPLEMENTAL-MIB

cRfSupSysAvailableStartTime
The date and time when this system began providing uninterrupted operation. This includes the time while either redundant unit was Active, but may also include brief intervals during switchover where the new Active unit was operational, but not yet reacha ...
cRfSupSysSwitchoverTime
The date and time when the last CPU switchover took place. This object will remain uninstantiated if no switchovers have taken place since the current Active CPU was initialized.
cRfSupSysSwitchovers
The number of times that switchovers have occurred since cRfSupSysAvailableStartTime. This object will remain uninstantiated if no switchovers have taken place since the current Active CPU was initialized or if a Standby unit was forced to take over befor ...
cRfSupSysRunningConfigSyncTime
The date and time when the running configuration was last successfully synced from the current Active unit to the Standby unit. This object will remain uninstantiated if no sync has yet taken place since the current Active CPU was initialized or if a Stan ...
cRfSupSysRunningConfigAdmin
Enables/Disables automatic running configuration syncs only. Doesn't affect other types of sync activity. If set to the default value enableAutoSync, the Active unit will send the full current running configuration following any operation that changes the ...
cRfSupSysRunningConfigOper
The current operational state of running configuration syncs. When the value inSync is returned, it indicates that the Standby running configuration is being kept actively in sync with the Active unit.
cRfSupSysStartupConfigSyncTime
The date and time when the startup configuration was last successfully synced from the current Active unit to the Standby unit(s). This object will remain uninstantiated if no sync has yet taken place since the current Active CPU was initialized or if a S ...
cRfSupSysStartupConfigAdmin
Enables/Disables automatic startup configuration syncs only. Doesn't affect other types of sync activity. If set to the default value enableAutoSync, the Active unit will send the full current startup configuration to the Standby unit(s) after any operati ...
cRfSupSysStartupConfigOper
The current operational state of startup configuration syncs. When the value inSync is returned, it indicates that the Standby startup configuration is being kept actively in sync with the Active unit.
cRfSupSysBootImageSyncTime
The date and time when the boot image memory was last successfully synced from the current Active unit to the Standby unit(s). This object will remain uninstantiated if no sync has yet taken place since the current Active CPU was initialized or if a Stand ...
cRfSupSysBootImageAdmin
Enables/Disables automatic boot image memory syncs only. Doesn't affect other types of sync activity. If set to the default value enableAutoSync, the Active unit will send the full current boot image memory to the Standby unit(s) after any operation that ...
cRfSupSysBootImageOper
The current operational state of boot image memory syncs. When the value inSync is returned, it indicates that Standby boot image memory is being actively mirrored from the Active unit.
cRfSupSysStandbyBootFile
Allow Standby unit(s) to automatically load a boot image which differs from the image specified for the Active unit. The string should be of the form :. Specifying a null value indicates that Standby unit(s) should not use a different im ...
cRfSupNotificationsEnabled
This specifies whether ciscoRfSupTimeChangeEvent, ciscoRfSupTimeZoneChangeEvent notifications shall be sent when the system's clock or time zone is changed causing a change in the values of cRfSupSysAvailableStartTime or cRfSupSysSwitchoverTime objects. N ...
cRfSupSysIfCounterSync
This object configures the synchronization of Interface Statistics information from Active CPU to the Standby CPU. When this object is set to 'true', synchronization is enabled. When this object is set to 'false', synchronization is disabled.
cRfSupCpuTable
A table containing redundancy-related information for individual CPU cards.
cRfSupCpuEntry
Information which can differ for each of the redundant CPU units in the system.
cRfSupCpuUniqueIndex
A table index which always has a unique platform-assigned value for each physical redundant unit within a particular system. This index should refer to a particular physical unit rather than a logically Active or Standby unit.
cRfSupCpuActiveSeverity
The fault severity of a redundant unit, as calculated by software. The value zero represents a good unit with no detected faults. Higher values represent progressively more serious faults. If it's not possible to determine any current or prior severity i ...
cRfSupCpuInitTime
The date and time when this redundant unit was last initialized. If the unit started out in the Standby state, this will also include the time while running as Standby.
cRfSupActionManualSync
This variable is set to invoke a one-time manual copy of the specified information type from the Active to one or more Standby units. When read, this object returns the last command written or noAction if no action has been written to the Active unit sinc ...
cRfSupActionLastSyncResult
Contains the result of the last Manual Sync action request. This object is instantiated only after the cRfSupActionManualSync object has been set to a value other than noAction.
ciscoRfSupSysGroup
The collection of RF SUPPLEMENTAL system-wide objects.
ciscoRfSupCpuGroup
The collection of RF SUPPLEMENTAL per-CPU objects.
ciscoRfSupActionGroup
The collection of RF SUPPLEMENTAL execution actions.
ciscoRfSupSysOptionalGroup
The collection of optional RF SUPPLEMENTAL system-wide objects.
ciscoRfSupSysOptionalSyncGroup
The collection of optional RF SUPPLEMENTAL system wide objects that control and monitor the synchronization of information between the redundant system units.

Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.

MIBs list