CISCO-PSD-CLIENT-MIB

CISCO-PSD-CLIENT-MIB Download

MIBs list

This MIB module manages the client side functionality of the Persistent Storage Device(PSD). This MIB instrumentation is for configuring data-store(PSD client) feature on GGSN and monitoring the state of the PSD server(up/down/full). The Cisco Persistent Storage Device(PSD) is an extension to existing storage on the Cisco Content Services Gateway(CSG). The GGSN currently allows sending of the CDRs to an active CG, while allowing up to two standby CG's to be configured. When all the configured CG's become unavailable, the CDRs get stored at the GGSN and start using up GGSN resources such as memory. As the amount of memory is limited on GGSN and failure of GGSN shall lead to losing these stored CDRs. Using PSD as temporary storage, shall avoid losses due to these problems. When all the configured CG's are unavailable, GGSN needs to backup the live closed CDR's to a PSD. When any of the CG's shall become available, GGSN shall retrieve the stored CDR's automatically from the PSD and forwards them to the active CG. PSD supports the charging protocol(GTP'), version 0 with a few private extensions, which is used to facilitate the required functionality via UDP.

IPHost Network Monitor offer an easy way of SNMP monitoring your Cisco Servers, Routers, Switches, Bridges, Firewalls, Repeaters.

OID list for CISCO-PSD-CLIENT-MIB

cPsdClientDSWriteReq
The number of Data Record Transfer request (for write) messages sent to the PSD server. This counter is incremented when the FIFO write request is sent to the PSD server from the client.
cPsdClientDSReadReq
The number of Data Record Transfer request (for read) messages sent to PSD server. This counter is incremented when the FIFO read request message is sent to PSD server.
cPsdClientDSRdWrRetrans
The number of Data Record Transfer Request (retransmission) messages sent to the PSD server. The PSD does not differentiate between a retransmission and original request. So, this counter together with the above two counters cPsdClientDSReadReq/ cPsdClien ...
cPsdClientDSDiskFullTrans
The number of state transitions made by the PSD from state 'disk available' to 'disk full'. This counter is incremented when client receives the disk full indication from PSD server.
cPsdClientNotifEnable
This object specifies whether the agent should generate the notifications defined in this MIB module. If the value of this object is 'true' it enables the device to generate the notifications. If the value of this object is 'false' it disables the device ...
cPsdClientDSTable
A table consisting of entries for data-store(DS) and auto-retrieval configurations. In order to minimize the performance/memory impact on the PSD client, as well as not to overwhelm the CG with both live CDRs and retrieved CDRs, the maximum retrieval rate ...
cPsdClientDSEntry
Each entry contains the configuration for auto-retrieval and also maximum retrieval value if auto-retrieval is enabled.
cPsdClientDSName
This object contains the name of the configured data-store
cPsdClientDSAutoRetrieve
This object is used to enable/disable the CDR auto-retrieval functionality. If value of this object is set to 'true', auto-retrieval is enabled. If value of this object is set to 'false', auto-retrieval is disabled.
cPsdClientDSMaxRetrieve
This object used to specify the maximum retrieval value, when auto retrieve is enabled, i.e when the value of the corresponding instance of cPsdClientDSAutoRetrieve is set to 'true'.
cPsdClientDSRowStatus
The status of this conceptual row. This object is used to create a row or delete a existing row in a table.
cPsdClientDSServerTable
The table contains the list of the PSD servers used to write/retrieve the CDRs.
cPsdClientDSServerEntry
This entry contains a description of the PSD server.
cPsdClientDSServerAddressType
This object indicates the type of Internet address of the PSD server.
cPsdClientDSServerAddress
The object specifies the Internet address of the PSD server. The type of address of an instance of this object is determined by the value of the corresponding instance of cPsdClientDSServerAddressType.
cPsdClientDSRetrieveOnly
The object represents that, the PSD server can be configured either as write/retrievable or as retrievable only. If the value of this object is set to 'true', the PSD server (the value of the corresponding instance of cPsdClientDSServerAddress) shall not ...
cPsdClientDSServerRowStatus
The status of this conceptual row. This object will create a row or delete a existing row in a table.
cPsdClientNotifDSServerAddrType
This object indicates the type of Internet address of the Data-Store server.
cPsdClientNotifDSServerAddress
This object specifies the Internet address of the Data-Store server . The type of address of an instance of this object is determined by the value of cPsdClientNotifDSServerAddrType.
cPsdClientMIBStatisticsGroup
A collection of objects providing Data Store related statistics.
cPsdClientMIBConfigurationsGroup
A collection of objects providing Data Store related configurations.
cPsdClientMIBNotifInfoGroup
A collection of notification info objects on PSD.
cPsdClientMIBNotifMgmtGroup
A collection of objects related with notification management on PSD.

Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.

MIBs list