CISCO-MVPN-MIB

CISCO-MVPN-MIB Download

MIBs list

This MIB contains managed object definitions for Cisco implementation of multicast in VPNs defined by the Internet draft: draft-rosen-vpn-mcast-05.txt. Note that this MIB works along with the L3VPN-MPLS-VPN-MIB.

IPHost Network Monitor offer an easy way of SNMP monitoring your Cisco Servers, Routers, Switches, Bridges, Firewalls, Repeaters.

OID list for CISCO-MVPN-MIB

ciscoMvpnMvrfNumber
The number of MVRFs that are present in this device.
ciscoMvpnNotificationEnable
If this object is TRUE, then the generation of all notifications defined in this MIB is enabled.
ciscoMvpnGenericTable
This table gives the generic information about the MVRFs present in this device.
ciscoMvpnGenericEntry
An entry in this table is created for every MVRF in the device. Note that many implementations may have MVRF for global VRF (VRF0) by default in the device. Also note that existence of the correspoding VRF in L3VPN-MPLS-VPN-MIB is necessary for a row to e ...
ciscoMvpnGenOperStatusChange
This object describes the last operational change that happened for the given MVRF. createdMvrf - indicates that the MVRF was created in the device. deletedMvrf - indicates that the MVRF was deleted from the device. A row in this table will never have cis ...
ciscoMvpnGenOperChangeTime
The time at which the last operational change for the MVRF in question took place. The last operational change is specified by ciscoMvpnGenOperStatusChange.
ciscoMvpnGenAssociatedInterfaces
Total number of interfaces associated with this MVRF (including the MDT tunnel interface) with ifOperStatus = up(1).
ciscoMvpnGenRowStatus
This variable is used to create or delete a row in this table.
ciscoMvpnMdtDefaultTable
This table specifies the default MDT address and the encapsulation type used for a MVRF instance.
ciscoMvpnMdtDefaultEntry
An entry in this table is created for every MVRF for which a default MDT group is configured. A MVRF which does not have a default MDT group configured will not appear in this table. Creation of a row in this table is the equivalent of configuring default ...
ciscoMvpnMdtDefaultAddrType
The Internet address type of ciscoMvpnMdtDefaultAddress.
ciscoMvpnMdtDefaultAddress
The default MDT address to be used for the MVRF in question.
ciscoMvpnMdtEncapsType
The encapsulation type to be used in the MVRF in question.
ciscoMvpnMdtDefaultRowStatus
This variable is used to create, modify or delete a row in this table.
ciscoMvpnMdtDataTable
This table specifies the range of data MDT addresses and associated variables for a MVRF instance.
ciscoMvpnMdtDataEntry
An entry in this table is created for every MVRF for which a data MDT group range is configured. A MVRF which does not have a data MDT group range configured will not appear in this table. Creation of a row in this table is the equivalent of configuring d ...
ciscoMvpnMdtDataRangeAddrType
The Internet address type of ciscoMvpnMdtDataRangeAddress.
ciscoMvpnMdtDataRangeAddress
The data MDT group range address for the given MVRF. This along with ciscoMvpnMdtDataWildcardBits gives the pool of data MDT addresses that can be used for encapsulation in the MVRF upon data MDT switchover.
ciscoMvpnMdtDataWildcardType
The Internet address type of ciscoMvpnMdtDataWildcardBits.
ciscoMvpnMdtDataWildcardBits
Wildcard bits which when used along with data MDT range address, give a pool of addresses to be used in a MVRF. For example, if ciscoMvpnMdtDataRangeAddress is 239.1.2.0 and ciscoMvpnMdtDataWildcardBits is 0.0.0.3, the possible data MDT addresses are 239. ...
ciscoMvpnMdtDataThreshold
The bandwidth threshold value which when exceeded for a multicast routing entry in the given MVRF, triggers usage of data MDT address instead of default MDT address for encapsulation.
ciscoMvpnMdtDataRowStatus
This variable is used to create, modify or delete a row in this table.
ciscoMvpnMrouteMdtTable
Given a multicast routing entry and the context MVRF, this table provides information about the MDT group being used for encapsulating the traffic for the multicast routing entry in the provider network at the instance of querying. Note that this table is ...
ciscoMvpnMrouteMdtEntry
An entry in this table exists for a multicast routing entry the traffic for which is being encapsulated in a context MVRF.
ciscoMvpnMrouteMvrfGrpAddrType
The Internet address type of ciscoMvpnMrouteMvrfGroup.
ciscoMvpnMrouteMvrfGroup
Group adddress of multicast routing entry in question.
ciscoMvpnMrouteMvrfSrcAddrType
The Internet address type of ciscoMvpnMrouteMvrfSource.
ciscoMvpnMrouteMvrfSource
Source adddress of the multicast routing entry in question.
ciscoMvpnMrouteUpDownStreamInfo
Indicates if this PE is the upstream (sending) or the downstream (receiving) router for the multicast routing entry specified by ciscoMvpnMrouteMvrfSource and ciscoMvpnMrouteMvrfGroup in the context MVRF specified by mplsVpnVrfName. Note that there may be ...
ciscoMvpnMrouteMdtGrpAddrType
The Internet address type of ciscoMvpnMrouteMdtGroup.
ciscoMvpnMrouteMdtGroup
MDT group address used to encapsulate the multicast routing entry specified by ciscoMvpnMrouteMvrfSource and ciscoMvpnMrouteMvrfGroup in the context MVRF specified by mplsVpnVrfName.
ciscoMvpnMrouteMdtType
Indicates the type of MDT group used for encapsulation.
ciscoMvpnBgpMdtUpdateTable
This table has information about the BGP advertisement of the the MDT groups. (These advertisements are generated and used for source discovery when SSM is used.)
ciscoMvpnBgpMdtUpdateEntry
An entry in this table is created when a BGP advertisement of the MDT group is received and cached in the PE device. An entry in this table deleted when such a cached BGP MDT update is withdrawn.
ciscoMvpnBgpMdtUpdGrpAddrType
The Internet address type of ciscoMvpnBgpMdtUpdateGroup.
ciscoMvpnBgpMdtUpdateGroup
MDT group address in the BGP MDT advertisement.
ciscoMvpnBgpMdtUpdateRd
RD (route distinguisher) in the BGP MDT advertisement. This is the RD corresponding to the originator PE.
ciscoMvpnBgpMdtUpdSrcAddrType
The Internet address type of ciscoMvpnBgpMdtUpdateSource.
ciscoMvpnBgpMdtUpdateSource
MDT source address in the BGP MDT advertisement.
ciscoMvpnBgpMdtUpdOrigAddrType
The Internet address type of ciscoMvpnBgpMdtUpdateOriginator.
ciscoMvpnBgpMdtUpdateOriginator
The BGP peering address of the device that originated (or advertized) the BGP MDT update.
ciscoMvpnBgpMdtUpdNhAddrType
The Internet address type of ciscoMvpnBgpMdtUpdateNexthop.
ciscoMvpnBgpMdtUpdateNexthop
The next-hop address (address of the border router to be used to reach the destination network) in the BGP MDT advertisement.
ciscoMvpnMdtJnRcvTable
This table has information about the data MDT join TLVs received by a device.
ciscoMvpnMdtJnRcvEntry
An entry in this table is created or updated for every MDT data join TLV received and cached in the device. The value of mplsVpnVrfName in such an entry specifies the name of the MVRF for which the data MDT groups from the TLVs are used.
ciscoMvpnMdtJnRcvGrpAddrType
The Internet address type of ciscoMvpnMdtJnRcvGroup.
ciscoMvpnMdtJnRcvGroup
Data MDT group address in the MDT join TLV.
ciscoMvpnMdtJnRcvSrcAddrType
The Internet address type of ciscoMvpnMdtJnRcvSource.
ciscoMvpnMdtJnRcvSource
Source address for the MDT multicast routing entry created following the receipt of MDT join TLV.
ciscoMvpnMdtJnRcvUpTime
The time since this MDT join TLV was first received by the device.
ciscoMvpnMdtJnRcvExpTime
The amount of time remaining before the cache corresponding to this MDT join TLV is deleted from the device and the corresponding MDT multicast routing entry is marked as a non-MDT entry. Note that multiple TLVs for a data MDT group may be received by a ...
ciscoMvpnMdtJnSendTable
This table specifies the data MDT Join TLVs sent by a device.
ciscoMvpnMdtJnSendEntry
Entries in this table exist for data MDT Join TLVs that are being sent by this device to other PEs.
ciscoMvpnMdtJnSendGrpAddrType
The Internet address type of ciscoMvpnMdtJnSendGroup.
ciscoMvpnMdtJnSendGroup
This indicates the address of a multicast group in the MVRF specified by the column mplsVpnVrfName. This along with ciscoMvpnMdtJnSendSource identifies the multicast routing entry for which the MDT join TLV is sent.
ciscoMvpnMdtJnSendSrcAddrType
The Internet address type of ciscoMvpnMdtJnSendSource.
ciscoMvpnMdtJnSendSource
This indicates the address of a source in the MVRF specified by the column mplsVpnVrfName. This, along with ciscoMvpnMdtJnSendGroup identifies the multicast routing entry for which the MDT join TLV is sent.
ciscoMvpnMdtJnSendMdtGrpAddrType
The Internet address type of ciscoMvpnMdtJnSendMdtGroup.
ciscoMvpnMdtJnSendMdtGroup
The data MDT group in the MDT Join TLV sent.
ciscoMvpnMdtJnSendMdtRefCt
Indicates how many multicast routing entries in the MVRF specified by the column mplsVpnVrfName are using ciscoMvpnMdtJnSendMdtGroup for encapsulation.
ciscoMvpnTunnelTable
This table gives information about the MVPN/MDT tunnels present in the device.
ciscoMvpnTunnelEntry
An entry in this table is created for every MVPN tunnel interface present in the device. The ifType for a MVPN tunnel is 'tunnel' (131). (A MVPN tunnel interface should have relevant generic support in the IF-MIB and in the internet draft, draft-thaler-in ...
ciscoMvpnTunnelName
The canonical name assigned to the tunnel. The ifName of this tunnel interface should have a value equal to ciscoMvpnTunnelName.
ciscoMvpnTunnelMvrf
Name of the MVRF that this tunnel is associated with. This object has the same value as mplsVpnVrfName for the MVRF.
ciscoMvpnScalarGroup
Collection of scalar objects required for MVPN management.
ciscoMvpnMIBGenericGroup
Collection of objects needed for MVPN MVRF management.
ciscoMvpnMIBMdtDefaultGroup
Collection of objects needed for MVPN default MDT group management.
ciscoMvpnMIBMdtDataGroup
Collection of objects needed for MVPN data MDT group management.
ciscoMvpnMIBMrouteMdtGroup
Collection of objects that list sources in a MVRF and the corresponding MDT groups.
ciscoMvpnMIBBgpMdtUpdateGroup
Collection of objects needed for MVPN BGP MDT updates related information.
ciscoMvpnMIBMdtJnRcvGroup
Collection of objects needed for management of MVPN MDT data joins received by a device.
ciscoMvpnMIBMdtJnSendGroup
Collection of objects needed for management of MVPN MDT data joins received by a device.
ciscoMvpnTunnelGroup
Objects required for MDT tunnel interface management.

Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.

MIBs list