CISCO-LWAPP-MOBILITY-MIB Download

cLMobilityAnchorTable

This table represents the information about the 802.11 LWAPP Mobility Anchors on individual WLANs. +...............+ + + + ROUTER + + 10.16.1.1 + +...............+ .. . . . . . . . . . ...

cLMobilityAnchorWlanSsid

Local wlan-ssid to connect to Guest/Anchor switch

cLMobilityAnchorSwitchAddressType

Guest/Anchor switch Address type.

cLMobilityAnchorSwitchAddress

Guest/Anchor switch Address. The IP Address is limited to IPv4 and IPv6.

cLMobilityAnchorStatus

Operational and Connectivity status of the Mobility Anchor. controlpath: When bit is '0', this means successive ICMP pings to the anchor have failed. When is '1', this means anchor is reachable and responding to ICMP pings. datapath: When bit is '0', this ...

cLMobilityAnchorGroupKeepAliveNumber

This parameter determines how many successive ping attempts to the anchor should fail before the anchor is declared DOWN.

cLMobilityAnchorGroupKeepAliveInterval

This parameter determines the time interval (in seconds) between two consecutive ping attempts to an anchor.

cLMobilityAnchorSmtStatus

This object allows user to enable or disable Symmetric mobility tunneling for the controller. The controller provides inter-subnet mobility for clients roaming from one AP to another within a Wireless LAN. This mobility is asymmetric in nature where the ...

cLMobilityAnchorWlanId

This object uniquely identifies one instance of a WLAN on the controller.

cLMobilityAnchorAddressType

Guest/Anchor switch Address type.

cLMobilityAnchorAddress

Guest/Anchor switch Address. The IP Address is limited to IPv4 and IPv6

cLNplus1RedundancyRev01ConfigGroup

This is a collection of objects which can configured to control functional parameters of Guest Tunneling N+1 Redundancy feature in CISCO 4400 / 2006 series of WLAN controllers.

cLNplus1RedundancyRev01StatusGroup

This collection of objects represents the information about the general status attributes of Guest Tunneling N+1 Redundancy in CISCO 4400 / 2006 series of WLAN controllers.

cLSymmetricTunnelingRev01ConfigGroup

This is a collection of objects which can be configured to control functional parameters of Symmetric Mobility Tunneling feature in CISCO 4400 / 2006 series of WLAN controllers.

cLSymmetricTunnelingRev01StatusGroup

This collection of objects represents the information about the general status attributes of Symmetric Mobility Tunneling feature in CISCO 4400 / 2006 series of WLAN controllers.