CISCO-LWAPP-LOCAL-AUTH-MIB

CISCO-LWAPP-LOCAL-AUTH-MIB Download

MIBs list

This MIB is intended to be implemented on all those devices operating as Central controllers, that terminate the Light Weight Access Point Protocol tunnel from Cisco Light-weight LWAPP Access Points. Information provided by this MIB is used to manage Local authentication information on the controller.

IPHost Network Monitor offer an easy way of SNMP monitoring your Cisco Servers, Routers, Switches, Bridges, Firewalls, Repeaters.

OID list for CISCO-LWAPP-LOCAL-AUTH-MIB

cllaActiveTimeout
The timeout period for the Local EAP to remain active, in seconds.
cllaEapProfileTable
This table represents the local EAP authentication information on the controller. Rows are added or deleted by explicit management actions initiated by the user from a network management station through the cllaEapProfileRowStatus object.
cllaEapProfileEntry
A conceptual row in cllaEapProfileTable. Each entry in this table represents the local EAP authentication information, identified by the cllEapProfileName.
cllaEapProfileName
This object represent the profile name used to identify the Local EAP information.
cllaEapProfileMethods
This object represents the method type for this entry. none - No method is in use leap - LEAP is used as one of the methods eap-fast - EAP-FAST is used as one of the methods tls - TLS is being used as one of the methods.
cllaEapProfileCertIssuer
This object represents the name of the certificate issuer cisco - Cisco is the certificate issuer. vendor - The issuer is an outside vendor.
cllaEapProfileCaCertificationCheck
This parameter indicates whether to check peer certificate against installed CA certificates.
cllaEapProfileCnCertificationIdVerify
This parameter indicates whether to verify certificate CN against peer identity and user database.
cllaEapProfileDateValidityEnabled
This parameter indicates whether to verify certificate date is valid and is within validity period.
cllaEapProfileLocalCertificateRequired
This is applicable when cllaEapProfileMethods is EAP-FAST parameter. This parameter indicates whether local certificate is required.
cllaEapProfileClientCertificateRequired
This is applicable when cllaEapProfileMethods is EAP-FAST parameter. This parameter indicates whether client certificate is required.
cllaEapProfileRowStatus
Used to add or delete an entry in this table.
cllaWlanProfileTable
This table represents the information about configuring the EAP profiles for a WLAN. The creation of a new row occurs when a WLAN entry is added through an explicit network management action to the cLWlanConfigTable in CISCO-LWAPP-WLAN-MIB. Similarly, del ...
cllaWlanProfileEntry
Each entry in this table provides information about the Local EAP profile configured for this WLAN.
cllaWlanProfileName
The profile name configured for this WLAN.
cllaWlanProfileState
This object indicates whether Local Authentication is enabled or disables for this WLAN.
cllaUserPriorityTable
This table contains entries for 802.11 user credential methods configured in the controller. At startup, all the entries in this table are set up by the central controller. A management application can later change the priority order using the cllaUserPr ...
cllaUserPriorityEntry
A conceptual row in cllaUserPriorityTable. There is an entry in this table for each 802.11 user authentication available at the agent, as identified by a value of cllaUserCredential.
cllaUserCredential
This object represents the user crediantial information. local - indicates that local credential is used for authentication ldap - indicates that LDAP credential is used for authentication.
cllaUserPriorityNumber
This object represents the order in which the user credentials are validated by the controller. At start up, the agent assigns the value of this object. Later this can be changed by the management station. This object reflects the priority in which the ...
cllaEapMethodPacTtl
This is EAP Fast parameter. This parameter represents time to live for the protected access credentials.
cllaEapAnonymousProvEnabled
This is EAP Fast parameter. This parameter represents whether anonymous provisioning is enabled. A value of 'true' indicates the controller will accept anonymous requests. A value of 'false' indicates that the controller will reject anonymous requests.
cllaEapAuthorityId
This is EAP Fast parameter. This parameter configures the authority ID. The maximum length per platform is specified by the cllaEapAuthorityIdLength object.
cllaEapAuthorityInfo
This is EAP Fast parameter. This parameter configures the authority information.
cllaEapServerKey
This is EAP Fast parameter. This parameter configures the server key ID.
cllaEapAuthorityIdLength
This object represents the length of the cllaEapAuthorityId object, supported by this agent implementation.
ciscoLwappLocalAuthMIBConfigGroup
This collection of objects specifies the required configuration parameters for local authentication.

Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.

MIBs list