CISCO-ITP-GSP-MIB Download

cgspCLLICode

Common-Language Location Identification Codes (CLLI Codes). This object identifies the physical location of this device and can provide additional informaton on the device type.

cgspUtilSampleInterval

This object specifies the time interval used to monitor the utilization of SS7 links. This object in combination with cgspUtilThreshold, cgspLinkPlanCapacitySent and cgspLinkPlanCapacityRcvd will be used to calculate utilization of SS7 links. Changes to ...

cgspUtilThreshold

This object specifies the threshold of usage for all SS7 links in SP. This object is used to determine when to generate the ciscoGspLinkRcvdUtilChange or ciscoGspLinkSentUtilChange notifications. A value of zero indicates that no default threshold is spe ...

cgspUtilAbateDelta

This object allows the falling threshold to be lower than the rising threshold when calculating whether to generate the ciscoGspLinkRcvdUtilChange or ciscoGspLinkSentUtilChange notifications. This is done to prevent generating notifications for slight ch ...

cgspPlanCapacityDefault

This object provides a default for value for links with a cgspLinkType='sctpIp'. For all other types of linkset this value is ignored. When a linkset based on SCTP/IP and the values for the cgspLinkPlanCapacityRcvd or cgspLinkPlanCapacitySent object are ...

cgspEventSequenceNumber

Each event or notification is required to provide a sequence number to be used by the NMS to determine when messages from a particular device are missing. This value will included in each SS7 notification issued by this device.

cgspUPUNotifWindowTime

This object specifies the time interval used to monitor the ciscoGspUPUReceived and ciscoGspUPUTransmitted notifications for specific user part and signalling point instance. The first occurrence of ciscoGspUPUReceived and ciscoGspUPUTransmitted notifica ...

cgspProfileTable

A table that contains the Profiles of signalling points. Entries are added to this table via cgspProfileRowStatus in accordance with the RowStatus convention.

cgspProfileTableEntry

A list of Profile attributes. Profiles are used to specify common configuration options for SS7 links without customizing each link. A profile is created with the specified values using this table and the cgspProfileTimerTable Table. The common values a ...

cgspProfileName

Name of the profile.

cgspProfileVariant

The SS7 variant used to format data specified in this profile.

cgspProfileMtp2BundleTimer

Bundle timer value. This value is used to control the bundling of SS7 packets as they are transported within the device. The value of zero indicates that MTP3 packets will not be bundled for transmission as they arrival for transmission at the MTP2 laye ...

cgspProfileMtp2SendQueueDepth

The maximum Queue depth allowed per link for MTP2 waiting to be transmitted.

cgspProfileRowStatus

The object is used by a management station to create or delete the row entry in cgspProfileTable following the RowStatus textual convention.

cgspProfileTimerTable

A table that contains a profile of timers used to configure SS7 links. Entries are added to this table via cgspProfileTimerRowStatus in accordance with the RowStatus convention.

cgspProfileTimerTableEntry

A list of ProfileTimer attributes. Profiles are used to specify common timer configuration options for SS7 links without customizing each link. A profile is created with the specified values using this table and the cgspProfileTable Table. The common va ...

cgspProfileTimerNumber

Index into table containing timer information.

cgspProfileTimerValue

Value of timer selected by cgspProfileTimerNumber object.

cgspProfileTimerRowStatus

The object is used by a management station to create or delete the row entry in cgspProfileTimerTable following the RowStatus textual convention.

cgspInstanceTable

A table that contains the instances of signalling points. Entries are added to this table via cgspInstRowStatus in accordance with the RowStatus convention.

cgspInstanceTableEntry

A list of instance attributes.

cgspInstNetwork

The network name is used to indicate the network in which this signalling point is participating. One or more instances of signalling points can exist in the same physical device. This identifier will be used to correlate instances of signalling points b ...

cgspInstNetworkIndicator

The Network Indicator for this Signalling point instance.

cgspInstVariant

The SS7 variant used to format data used by this instance.

cgspInstDisplayName

A short identifier for the Signalling point. This value can be set by system administrator or defaults to the local point code formatted as an ASCII string.

cgspInstDescription

A textual description for the Signalling point.

cgspInstTFR

Allow transfer restricted messages. 'true' TFR are allowed. 'false' TFR are disabled.

cgspInstCongestionsLevels

Allow multiple congestion levels. 'true' multiple congestion levels are allowed. 'false' multiple congestion levels are disabled.

cgspInstFastRestart

The support for fast restarts as follows. 'true' fast restart is enabled. 'false' fast restart is disabled.

cgspInstDistSccpUnseq

Evenly distribute Class 0 SCCP messages as follows. 'true' Evenly distribute 0 SCCP messages is enabled. 'false' Evenly distribute 0 SCCP messages is disabled.

cgspInstSummaryRoutingException

This object is used to control the usage of the summary route when both a summary route (or ANSI cluster route) and a full point-code route (within that summary) are configured. The object is used to indicate whether the summary route is to be used when ...

cgspInstNumber

A unique Identifier assigned to each instance.

cgspInstRouteTableName

The routing table for Signalling network management messages.

cgspInstRowStatus

The object is used by a management station to create or delete the row entry in cgspInstanceTable following the RowStatus textual convention.

cgspInstSccpWrrOpcShift

This object indicates the shift amount for the OPC bits in SCCP class1 WRR(Weighted round robin). The range depends on the variant as follows. The ITU range is 0-2 The ANSI range is 0-8 The CHINA range is 0-2 The JAPAN NTT range is 0-2 The JAPAN TTC range ...

cgspInstSccpWrrOption

This object indicate the options for calculate SCCP class 1 traffic loadshare under WRR

cgspInstTimerTable

A table that contains the timer used to configure an instances of signalling points. Entries are added to this table via cgspInstTimerRowStatus in accordance with the RowStatus convention.

cgspInstTimerTableEntry

This table is used to configure all MTP3 timer values that apply to linksets and links. The values apply to all linkset and links defined to this signalling point(instances).

cgspInstTimerNumber

Index into table containing timer information.

cgspInstTimerValue

Value of timer selected by cgspInstTimerNumber object.

cgspInstTimerRowStatus

The object is used by a management station to create or delete the row entry in cgspInstTimerTable following the RowStatus textual convention.

cgspInstUPUTable

The Instance UPU table contains information about the number of UPU MSUs transmitted and received for the specific user part(represented by service indicator) and signalling point instance. The user part is primarily represented with the possible service ...

cgspInstUPUTableEntry

Each table entry represent the UPU MSU statistics for a specific user part and signalling point instance.

cgspMtp3SI

The service indicator.

cgspInstSIUPUReceived

The number of UPU MSUs that were received for the associated user part(service indicator) and and signalling point instance Q752/5.7.

cgspInstSIUPUTransmitted

The number of UPU MSUs that were transmitted for the associated user part(service indicator) and and signalling point instance.

cgspInstUserPartDisplay

The associated instance name and user part information formatted for display.

cgspPointCodeTable

A table that contains a list of point code defined for the Signalling point defined by this instance. Entries are added to this table via cgspPointCodeRowStatus in accordance with the RowStatus convention.

cgspPointCodeTableEntry

A list of Point codes for a signalling point defined by an instance.

cgspPointCodeNi

The network Indicator for this pointcode.

cgspPointCodeBin

The point code for this Signalling Point.

cgspPointCodeType

The function of this point code.

cgspPointCodeDisplay

The point code for this Signalling Point.

cgspPointCodeRowStatus

The object is used by a management station to create or delete the row entry in cgspPointCodeTable following the RowStatus textual convention.

cgspLinksetTable

A table of linksets for this Signalling Point defined by this instance.

cgspLinksetTableEntry

A list of Signalling Point linkset attributes for Signalling Point define by this instance.

cgspLinksetName

The name of the linkset.

cgspLinksetSourcePointCode

The point code to which this linkset is connected.

cgspLinksetSourceDisplayPC

The point code to which this linkset is connected.

cgspLinksetAdjacentPointCode

The point code to which this linkset is connected.

cgspLinksetAdjacentDisplayPC

The point code to which this linkset is connected.

cgspLinksetState

The list of possible linkset states. 'available' : Traffic may flow over this linkset 'shutdown' : This linkset has been forced to an unavailable state by an administrative action. 'unavailable': The linkset is currently unable to support traffic. Acti ...

cgspLinksetInboundAcl

Packets are filtered against this access control list before they are passed to the routing function. A value of zero indicates that no access control list is present.

cgspLinksetOutboundAcl

Packets are filtered against this access control list after they have passed through the routing function. A value of zero indicates that no access control list is present.

cgspLinksetAccountingMtp3

This indicates if accounting for this linkset is enabled. 'true' Indicates that the accounting function is enabled for this linkset and is being accumulated in cgactMtp3Table. 'false' Indicates that the accounting function is disabled.

cgspLinksetAccountingGtt

This indicates if accounting for this linkset is enabled. 'true' Indicates that the accounting function is enabled for this linkset and is being accumulated in cgactMtp3Table. 'false' Indicates that the accounting function is disabled.

cgspLinksetNumLinks

The number of links in this linkset.

cgspLinksetDurationInService

Time linkset was providing service related to Q752/Table 4.2.

cgspLinksetDurationOutService

Time linkset was Out-of-Service as required for Q752/Table 4.2.

cgspLinksetActPriority

Defines the activation priority for linksets. The linksets with the lowest values will be activated first. If two or more linksets share the same values they will be activated in the order they were defined.

cgspLinksetDisplayName

A short identifier for each linkset. This value can be set by system administrator or defaults to the linkset name.

cgspLinksetDescription

A textual description for the Signalling point.

cgspLinksetRotateSlsEnable

This defines whether signalling link selector(SLS) will be rotated. This option only applies to ANSI variant and will return false for all other variants. By default SLS rotation is enable by default for ANSI linksets. ANSI specifications state that SL ...

cgspLinksetRotateSlsShift

This value used to shift the signalling link selector(SLS) when rotation is enabled. This option only applies to ANSI variant and will return 0 all other variants.

cgspLinksetProfileName

When specified this object indicates which profile will be used to establish defaults for common configuration values like MTP2 and MTP3 timers. The null string is used to indicate that the linkset does not have a profile.

cgspLinksetAdjacentInst

When a linkset is used to carry traffic between different instances, this object contains the network name used as an index into the cgspInstanceTable table. In all other cases the object will contain the same network name as the source signalling point.

cgspLinksetRowStatus

The object is used by a management station to create or delete the row entry in cgspLinksetTable following the RowStatus textual convention.

cgspLinksetTimerTable

A table that contains the timer used to configure timer values specific to a particular linkset. Entries are added to this table via cgspLinksetTimerRowStatus in accordance with the RowStatus convention.

cgspLinksetTimerTableEntry

This table is used to configure all MTP3 timer values that apply to linksets and links. The values apply to this linkset and links it c contains.

cgspLinksetTimerNumber

Index into table containing timer information.

cgspLinksetTimerValue

Value of timer selected by cgspLinksetTimerNumber object.

cgspLinksetTimerRowStatus

The object is used by a management station to create or delete the row entry in cgspLinksetTimerTable following the RowStatus textual convention.

cgspLinkTable

A table of links for each Signalling Point.

cgspLinkTableEntry

A list of signalling point link attributes.

cgspLinkSlc

The Signalling Link Code for this link.

cgspLinkDescription

A textual description for this link.

cgspLinkState

The list of possible links states. 'available' : Traffic may flow over this linkset 'failed' : Traffic management has detected a failure that prevents activating this linkset. 'shutdown' : This linkset has been forced to an unavailable state by an ...

cgspLinkReason

This object provides additional information on the source of a link failure. This object will contain the last reason that caused the link to fail. 'unknown' : Link has failed do to an undetermined cause. 'changeOverInProgress' : Change over in progress. ...

cgspLinkType

The link type.

cgspLinkifIndex

If the link type specified by cgspLinkType is serial or high speed Link, this is the ifIndex specified in IF-MIB, otherwise no significance is to be placed on this value.

cgspLinkSctpAssociation

Association Identifiers can be greater than 65,535. This object has been replaced by cgspLinkSctpAssociationId.

cgspLinkXmitQueueDepth

Number of packets waiting to be sent over this link.

cgspLinkXmitQueueDepthHigh

This is the maximum number of packets waiting to be sent over this link since the last time this value was reset as indicated by cgspLinkXmitQueueDepthHighRT. Resetting this object is achieved by setting this object to 0. Attempting to set this object to ...

cgspLinkXmitQueueDepthHighRT

This indicates when cgspLinkXmitQueueDepthHigh was last set to 0.

cgspLinkCongestionState

The Signalling link congestion status of this link. 0 is the least congestion level, 3 is the highest congestion level.

cgspLinkCongestionAbate1

Threshold used to abate congestion level 1.

cgspLinkCongestionAbate2

Threshold used to abate congestion level 2.

cgspLinkCongestionAbate3

Threshold used to abate congestion level 3.

cgspLinkCongestionOnset1

Threshold used to mark onset of congestion level 1.

cgspLinkCongestionOnset2

Threshold used to mark onset of congestion level 2.

cgspLinkCongestionOnset3

Threshold used to mark onset of congestion level 3.

cgspLinkSigLinkTest

Indicated if Signalling link test is enabled on this link. true : Signalling link test is enabled. false : Signalling link test not enabled.

cgspLinkQ752T1E1

Duration of link in the In-Service state Q752/1.1.

cgspLinkQ752T1E2

Count of Signalling Link failures - All reasons Q752/1.2.

cgspLinkQ752T1E3

Count of Signalling Link failures - Abnormal FIBR/BSNR Q752/1.3

cgspLinkQ752T1E5

Count of Signalling Link failures - Excessive error rate Q752/1.5.

cgspLinkQ752T1E7

Count of alignment or proving errors Q752/1.7.

cgspLinkQ752T1E8

Count of signal units received in error Q752/1.8.

cgspLinkQ752T1E9

Count of negative acknowledgements received Q752/1.9.

cgspLinkQ752T1E10

Count of 'local automatic changeover' events Q752/1.10.

cgspLinkQ752T1E11

Count of 'local automatic changeback' events Q752/1.11.

cgspLinkQ752T2E1

Duration of Signalling Link unavailable(for any reason) Q752/2.1.

cgspLinkQ752T2E5

Duration of Signalling Link unavailable due to local management actions Q752/2.5.

cgspLinkQ752T2E6

Duration of Signalling Link unavailable due to remote management actions Q752/2.6.

cgspLinkQ752T2E7

Duration of Signalling Link unavailable due to link failure Q752/2.7.

cgspLinkQ752T2E9

Duration of Signalling Link unavailable due to remote processor outage Q752/2.9.

cgspLinkQ752T2E10

Count of 'remote processor outage' events Q752/2.10 and Q752/2.11. The standard only requires that events are issued. The entries have been combined into a single entry to track all occurrences of these event types.

cgspLinkQ752T2E15

Count of Status Indicator Busy received Q752/2.15.

cgspLinkQ752T2E16

Count of local inhibition Q752/2.16 and Q752/2.17. The standard only requires that events are issued. The entries have been combined into a single entry to track all occurrences of these event types.

cgspLinkQ752T2E18

Count of remote inhibition Q752/2.18 and Q752/2.19. The standard only requires that events are issued. The entries have been combined into a single entry to track all occurrences of these event types.

cgspLinkQ752T3E1

The number of MTP3 bytes sent by this link. This measurement is specified in Q752/3.1

cgspLinkQ752T3E2Bytes

The number of MTP3 bytes retransmitted on this link. This measurement is specified in Q752/3.2

cgspLinkQ752T3E2Packets

The number of MTP3 packets retransmitted on this link. This measurement is specified in Q752/3.2

cgspLinkQ752T3E3

The number of MTP3 packets sent by this link. This measurement is specified in Q752/3.3.

cgspLinkQ752T3E4

The number of MTP3 bytes received by this link. This measurement is specified in Q752/3.4

cgspLinkQ752T3E5

The number of MTP3 packets received by this link. This measurement is specified in Q752/3.5

cgspLinkQ752T3E6

The number times this Signalling link was marked congested. This measurement is specified in Q752/3.6

cgspLinkQ752T3E7

Cumulative duration of Signalling link congestion Q752/3.7.

cgspLinkQ752T3E10L1

The number of packets(MSUs) discarded due to Signalling link level 1 congestion Q752/3.10

cgspLinkQ752T3E10L2

The number of packets(MSUs) discard due to Signalling link level 2 congestion Q752/3.10

cgspLinkQ752T3E10L3

The number of packets(MSUs) discard due to Signalling link level 3 congestion Q752/3.10

cgspLinkQ752T3E11L1

The number times this Signalling link entered congestion level 1 and packets were discarded. This measurement is specified in Q752/3.11

cgspLinkQ752T3E11L2

The number times this Signalling link entered congestion level 2 and packets were discarded. This measurement is specified in Q752/3.11

cgspLinkQ752T3E11L3

The number times this Signalling link entered congestion level 3 and packets were discarded. This measurement is specified in Q752/3.11

cgspLinkLocalPeerPort

When cgspLinkType is set to 'sctpIp' then this object contains the local port number used to create the association supporting this link. This object can be used to obtain information from the cgsp2LocalPeerTable and cgsp2LpIpAddrTable Tables in the CISCO ...

cgspLinkRemotePeerPort

When cgspLinkType is set to 'sctpIp' then this object contains the remote port number used to create the association supporting this link. When cgspLinkType is not set to 'sctpIp' then no significance is to be placed on this value.

cgspLinkQosClass

When cgspLinkType is set to 'sctpIp' then this object contains the quality of service class to be assigned to packets sent on this association. When cgspLinkType is not set to 'sctpIp' then no significance is to be placed on this value.

cgspLinkDisplayName

A short identifier for each link linkset. This value can be set by system administrator or defaults to the linkset name and SLC formatted as an ASCII string.

cgspLinkDroppedPkts

The number of packets that were dropped by this link.

cgspLinkTransmittedLSSUs

The number of Link Status Signal Units sent on this link.

cgspLinkReceivedLSSUs

The number of Link Status Signal Units received on this link.

cgspLinkProtocolDetails

This object provide details on the protocol states for this link as follows. Changeback control(TCBC) 'tcbcBuffering': Changeback control is buffering data on this link. Changeover control(TCOC) 'tcocBuffering': Changeover control is buffering data on thi ...

cgspLinkLsacState

Signalling link activity control state: 'undefined' - link is an undefined state 'inactive' - A Signalling link that is not in operation. 'active' - A Signalling link that is in operation. 'activatingRestoring' - A Signalling that is not operationa ...

cgspLinkTsrcState

Signalling traffic management routing control state: 'undefined' - link is an undefined state 'idle' - traffic management is idle 'wait5' - traffic management is active and in the sending status phase

cgspLinkTcocState

Changeover control State: 'undefined' - Link is an undefined state. 'idle' - Link is available and idle. 'wait2' - Wait for MTP2 to initialize link. 'waitForAck' - Waiting for changeover acknowledgement. 'retrieving' - Packets are being retrie ...

cgspLinkTcocLocalBSNT

The local backward sequence number to be transmitted.

cgspLinkTcocRemoteBSNT

The remote backward sequence number to be transmitted.

cgspLinkTcbcState

Changeback control State: 'undefined' - link is an undefined state. 'idle' - Link is available and idle. 'firstAttempt' - First attempt at changeback. 'secondAttempt' - Second attempt at changeback 'timeControlledDiversion' - Changeback usin ...

cgspLinkReceivedSIBs

The number of status indicator 'busy' link status signal units received on this link. The SIB indicates that level two is congested at the transmitting Signalling point.

cgspLinkTransmittedSIBs

The number of status indicator 'busy' link status signal units transmitted on this link. The SIB indicates that level two is congested at the transmitting Signalling point.

cgspLinkMtp2T01Counts

The number of times the alignment ready timer has expired on this link.

cgspLinkMtp2T02Counts

The number of times the not alignment ready timer has expired on this link.

cgspLinkMtp2T03Counts

The number of times the aligned timer has expired on this link.

cgspLinkMtp2T04Counts

The number of times the proving period timer has expired on this link.

cgspLinkMtp2T05Counts

The number of times the sending status indicator busy timer has expired on this link.

cgspLinkMtp2T06Counts

The number of times the remote congestion timer has expired on this link(Q752/1.6).

cgspLinkMtp2T07Counts

The number of times the excessive delay of acknowledgement timer has expired on this link(Q752/1.4).

cgspLinkOMAERMCounts

The number of times the Alignment Error Rate Monitor procedure was started on this link.

cgspLinkOMAERMFailCounts

The number of times the Alignment Error Rate Monitor procedure failed on this link.

cgspLinkOMSURMCounts

The number of times the Signal Unit Error Rate Monitor procedure was started on this link.

cgspLinkOMSURMFailCounts

The number of times the Signal Unit Error Rate Monitor procedure failed on this link.

cgspLinkPlanCapacityRcvd

An estimate of the number of bits per second that is expected to be received from this link. This object will be used in combination with cgspUtilSampleInterval, cgspUtilThreshold, cgspUtilThreshold and cgspLinkUtilThresholdRcvd to generate the ciscoGspL ...

cgspLinkUtilThresholdRcvd

This object specifies the threshold used to to generate the ciscoGspLinkRcvdUtilChange notification. The value of zero indicates the threshold has not been defined at the link level and the value from the cgspLinksetUtilThresholdRcvd or cgspUtilThreshold ...

cgspLinkUtilizationRcvd

An estimate of the utilization of this link for traffic received on this link in the prior time period defined by the cgspUtilSampleInterval object.

cgspLinkUtilStateRcvd

Link Utilization State for inbound traffic.

cgspLinkL2BytesRcvd

A count of the bytes received on the link including the additional bytes required by underlying protocols. This provides a transport independent mechanism for collection information on link utilization.

cgspLinkPlanCapacitySent

An estimate of the number of bits per second that is expected to be sent on this link. This object will be used in combination with cgspUtilSampleInterval, cgspUtilThreshold and cgspLinkUtilThresholdRcvd to generate the ciscoGspLinkSentUtilChange notifi ...

cgspLinkUtilThresholdSent

This object specifies the threshold used to generate the ciscoGspLinkRcvdUtilChange notification. The value of zero indicates the threshold has not been defined at the link level and the value from the cgspLinksetUtilThresholdRcvd or cgspUtilThreshold ob ...

cgspLinkUtilizationSent

An estimate of the utilization of this link for traffic sent on this link in the prior time period defined by the cgspUtilSampleInterval object.

cgspLinkUtilStateSent

Link Utilization State for out bound traffic.

cgspLinkL2BytesSent

A count of the bytes sent on the link including the additional bytes required by underlying protocols. This provides a transport independent mechanism for collection information on link utilization.

cgspLinkTestResult

This object provides information on result from signalling link test received on this link.

cgspLinkRowStatus

The object is used by a management station to create or delete the row entry in cgspLinkTable following the RowStatus textual convention.

cgspLinkSctpAssociationId

If the link type specified by cgspLinkType is 'sctpIp', this is the association identifier defined in the Stream Control Transmission Protocol(SCTP) MIB. Where value greater than zero indicates a valid association. The zero value indicates an association ...

cgspLinkQ752T1E12

Count of 'Signalling Link Restoration' events Q752/1.12.

cgspLinkQ752T1E12Errors

Count of 'Signalling Link Restoration' error events related to Q752/1.12. i.e., the number of times the link restoration was attempted and the link was not recovered.

cgspLinkQ752T2E11

Count of 'remote processor recovery' events Q752/2.11. The standard only requires that events are issued.

cgspLinkQ752T2E17

Count of local uninhibition Q752/2.17. The standard only requires that events are issued.

cgspLinkQ752T2E19

Count of remote uninhibition Q752/2.19. The standard only requires that events are issued.

cgspLinkRxCongestionState

The Signalling link Received Side congestion status of this link. 0 abate, 1 onset is the received side congestion level

cgspLinkTimerTable

A table that contains the timer used to configure timer values specific to a particular Link. Entries are added to this table via cgspLinkTimerRowStatus in accordance with the RowStatus convention.

cgspLinkTimerTableEntry

This table is used to configure all MTP3 timer values that apply to links. The values apply to a particular link.

cgspLinkTimerNumber

Index into table containing timer information.

cgspLinkTimerValue

Value of timer selected by cgspLinkTimerNumber object.

cgspLinkTimerRowStatus

The object is used by a management station to create or delete the row entry in cgspLinkTimerTable following the RowStatus textual convention.

cgspLinkRemoteIpAddrTable

A table that contains the remote IP addresses used to configure a particular Link. Entries are added to this table via cgspLinkRemoteIpAddrRowStatus in accordance with the RowStatus convention.

cgspLinkRemoteIpAddrTableEntry

A list of remote IP addresses per Link.

cgspLinkRemoteIpAddrNumber

This object specifies the index for the IP addresses in the remote IP Address table

cgspLinkRemoteIpAddrType

This object contains the type of the local IP address used to create an association.

cgspLinkRemoteIpAddress

This object contains the remote IP address used to create the association with the partner of this association.

cgspLinkRemoteIpAddrRowStatus

The object is used by a management station to create or delete the row entry in cgspLinkRemoteIpAddrTable following the RowStatus textual convention.

cgspLinkUtilTable

A table that contains a history of the cgspLinkUtilizationRcvd and cgspLinkUtilizationRcvd objects. In order to properly manage network capacity it is necessary to collect utilization information during short interval. These intervals are less than 5 mi ...

cgspLinkUtilTableEntry

A collection of entries used to store a history link utilization values. Values from cgspLinkUtilizationRcvd and cgspLinkUtilizationSent objects are saved in cgspLinkUtilRcvd and cgspLinkUtilSent.

cgspLinkUtilIndex

Index used to access historical link utilization information. Entry one corresponds to the most recent utilization window for the length of time specified by the cgspUtilSampleInterval object. Example of utilization history using default values. Current ...

cgspLinkUtilRcvd

An estimate of the utilization of this link for traffic received on this link in the time period defined by the cgspUtilSampleInterval object.

cgspLinkUtilSent

An estimate of the utilization of this link for traffic transmitted on this link in the time period defined by the cgspUtilSampleInterval object.

cgspLinkUtilEndTimestamp

This timestamp indicates when time period ended for this sample.

cgspLsStateChangeNotifEnabled

The signalling point linkset notification truth value. 'true' Indicates that ciscoGspLinksetStateChange notification is to be generated when the state changes. That is, the notification generation is enabled. 'false' Indicates that ciscoGspLinksetStateCh ...

cgspLnkStateChangeNotifEnabled

The signalling point link notification truth value. 'true' Indicates that ciscoGspLinkStateChange notification is to be generated when the state changes. That is, the notification generation is enabled. 'false' Indicates that ciscoGspLinkStateChange noti ...

cgspCongestionNotifEnabled

The signalling point congestion notification truth value. 'true' Indicates that ciscoGspCongestionChange and ciscoGspRxCongestionChange notification is to be generated when the state changes. That is, the notification generation is enabled. ' ...

cgspLinkUtilNotifEnabled

The signalling point link utilization notification truth value. 'true' Indicates that the notification of link utilization has been enabled. That is, the notification generation is enabled. 'false' Indicates that the notification link utilization has be ...

cgspIsolationNotifEnabled

The isolation notification truth value. 'true' Indicates that the notification of isolation has been enabled. That is, the notification generation is enabled. 'false' Indicates that the notification of isolation has been disabled.

cgspUPUNotifEnabled

A control to enable or disable both ciscoGspUPUReceived and ciscoGspUPUTransmitted notifications as follows: 'true' Indicates that the ciscoGspUPUReceived and ciscoGspUPUTransmitted notification generation is enabled. 'false' Indicates that ciscoGspUPURe ...

cgspUPUIntervalDuration

Duration elapsed since the start of the cgspUPUNotifWindowTime interval. This duration value can range from 0 upto cgspUPUNotifWindowTime. For the notifications generated at the end of the interval, this value will be equal to cgspUPUNotifWindowTime.

cgspIntervalUPUs

Number of UPU MSUs received or transmitted during this specific cgspUPUIntervalDuration interval.

ciscoGspScalarsGroup

Scalars Group for Gateway Signalling Point.

ciscoGspProfileGroup

Profile Group for Gateway Signalling Point.

ciscoGspInstanceGroup

Instance of Signalling Point.

ciscoGspInstTimerGroup

Timers defined for each Instance of Signalling Point.

ciscoGspPointCodeGroup

Pointcode defined for each Instance of Signalling Point.

ciscoGspLinksetGroup

linkset objects .

ciscoGspLinksetTimerGroup

Timers defined for each Linkset.

ciscoGspLinkGroup

SP link objects.

ciscoGspLinkTimerGroup

Timers defined for each Link.

ciscoGspLinkRemoteIpGroup

Remote IP addresses for each Link.

ciscoGspLinkUtilGroup

Utilization history for each Link.

ciscoGspNotificationsEnableGroup

SP enable notification objects.

ciscoGspLinkGroupRev1

SP link objects.

ciscoGspNotificationsEnableGroupSup1

Isolation notification enable.

ciscoGspLinkGroupSup1

Additional Link statistics.

ciscoGspScalarsGroupSup1

Scalar Group supplements.

ciscoGspInstUPUGroup

SS7 Destination and Service Indicator group.

ciscoGspNotificationsInfoGroup

Notifications Info Group.

ciscoGspNotificationsEnableGroupSup2

UPU notifications enable.

ciscoGspInstSccpWrrGroup

SCCP GTT weighted loadshare group.

ciscoGspLinkTableEntryGroupSup1

cgspLinkRxCongestionstate object for Received side congestion