CISCO-IETF-PW-MPLS-MIB Download

cpwVcMplsTable

This table specifies information for VC to be carried over MPLS PSN.

cpwVcMplsEntry

A row in this table represents parameters specific to MPLS PSN for a pseudo wire connection (VC). The row is created automatically by the local agent if the cpwVcPsnType is MPLS. It is indexed by cpwVcIndex, which uniquely identifying a singular connectio ...

cpwVcMplsExpBitsMode

Set by the operator to indicate the way the VC shim label EXP bits are to be determined. The value of outerTunnel(1) is used where there is an outer tunnel - cpwVcMplsMplsType is mplsTe or mplsNonTe. Note that in this case there is no need to mark the VC ...

cpwVcMplsExpBits

Set by the operator to indicate the MPLS EXP bits to be used on the VC shim label if cpwVcMplsExpBitsMode is specifiedValue(2), zero otherwise.

cpwVcMplsTtl

Set by the operator to indicate the VC TTL bits to be used on the VC shim label.

cpwVcMplsLocalLdpID

The local LDP identifier of the LDP entity creating this VC in the local node. As the VC labels are always set from the per platform label space, the last two octets in the LDP ID MUST be always both zeros.

cpwVcMplsLocalLdpEntityID

The local LDP Entity index of the LDP entity to be used for this VC on the local node. Should be set to all zeros if not used.

cpwVcMplsPeerLdpID

The peer LDP identifier as identified from the LDP session. Should be zero if not relevant or not known yet.

cpwVcMplsStorageType

This variable indicates the storage type for this row.

cpwVcMplsOutboundIndexNext

This object contains an appropriate value to be used for cpwVcMplsOutboundIndex when creating entries in the cpwVcMplsOutboundTable. The value 0 indicates that no unassigned entries are available. To obtain the cpwVcMplsOutboundIndex value for a new entry ...

cpwVcMplsOutboundTable

This table associates VCs using MPLS PSN with the outbound MPLS tunnels (i.e. toward the PSN) or the physical interface in case of VC only.

cpwVcMplsOutboundEntry

A row in this table represents a link between PW VC (that require MPLS tunnels) and MPLS tunnel toward the PSN. In the case of VC only, it associate the VC with the interface that shall carry the VC. This table is indexed by the pwVcIndex and an additiona ...

cpwVcMplsOutboundTunnelIndex

Part of set of indexes for outbound tunnel in the case of MPLS-TE outer tunnel, otherwise set to zero.

cpwVcMplsOutboundTunnelInstance

Part of set of indexes for outbound tunnel in the case of MPLS-TE outer tunnel, otherwise set to zero.

cpwVcMplsOutboundTunnelLclLSR

Part of set of indexes for outbound tunnel in the case of MPLS-TE outer tunnel, otherwise set to zero.

cpwVcMplsOutboundTunnelPeerLSR

Part of set of indexes for outbound tunnel in the case of MPLS-TE outer tunnel, otherwise set to zero.

cpwVcMplsOutboundIfIndex

In case of VC only (no outer tunnel), this object holds the ifIndex of the outbound port, otherwise set to zero.

cpwVcMplsOutboundRowStatus

For creating, modifying, and deleting this row.

cpwVcMplsOutboundStorageType

This variable indicates the storage type for this object.

cpwVcMplsInboundIndexNext

This object contains an appropriate value to be used for cpwVcMplsInboundIndex when creating entries in the cpwVcMplsInboundTable. The value 0 indicates that no unassigned entries are available. To obtain the cpwVcMplsInboundIndex value for a new entry, t ...

cpwVcMplsInboundTable

This table associates VCs using MPLS PSN with the inbound MPLS tunnels (i.e. for packets coming from the PSN), if such association is desired (mainly for security reasons).

cpwVcMplsInboundEntry

A row in this table represents a link between PW VCs (that require MPLS tunnels) and MPLS tunnel for packets arriving from the PSN. This table is indexed by the set of indexes used to identify the VC - cpwVcIndex and an additional index enabling multiple ...

cpwVcMplsInboundTunnelIndex

Part of set of indexes for outbound tunnel in the case of MPLS-TE outer tunnel, otherwise set to zero.

cpwVcMplsInboundTunnelInstance

Part of set of indexes for outbound tunnel in the case of MPLS-TE outer tunnel, otherwise set to zero.

cpwVcMplsInboundTunnelLclLSR

Part of set of indexes for outbound tunnel in the case of MPLS-TE outer tunnel, otherwise set to zero.

cpwVcMplsInboundTunnelPeerLSR

Part of set of indexes for outbound tunnel in the case of MPLS-TE outer tunnel, otherwise set to zero.

cpwVcMplsInboundIfIndex

In case of VC only (no outer tunnel), this object holds the ifIndex of the inbound port, otherwise set to zero.

cpwVcMplsInboundRowStatus

For creating, modifying, and deleting this row.

cpwVcMplsInboundStorageType

This variable indicates the storage type for this row.

cpwVcMplsNonTeMappingTable

This table maps an inbound/outbound Tunnel to a VC in non- TE applications.

cpwVcMplsNonTeMappingEntry

A row in this table represents the association between the PW VC and it's non TE MPLS outer Tunnel it's physical interface if there is no outer tunnel (VC only). An application can use this table to quickly retrieve the PW carried over specific non-TE MPL ...

cpwVcMplsNonTeMappingTunnelDirection

Identifies if the row represent an outbound or inbound mapping.

cpwVcMplsNonTeMappingXcTunnelIndex

Index for the conceptual XC row identifying Tunnel to VC mappings when the outer tunnel is created by the MPLS-LSR- MIB, Zero otherwise.

cpwVcMplsNonTeMappingIfIndex

Identify the port on which the VC is carried for VC only case.

cpwVcMplsNonTeMappingVcIndex

The value that represent the VC in the cpwVcTable.

cpwVcMplsTeMappingTable

This table maps an inbound/outbound Tunnel to a VC in MPLS-TE applications.

cpwVcMplsTeMappingEntry

A row in this table represents the association between a PW VC and it's MPLS-TE outer Tunnel. An application can use this table to quickly retrieve the PW carried over specific TE MPLS outer tunnel. The table in indexed by the 4 indexes of a TE tunnel, th ...

cpwVcMplsTeMappingTunnelDirection

Identifies if the row represent an outbound or inbound mapping.

cpwVcMplsTeMappingTunnelIndex

Primary index for the conceptual row identifying the MPLS-TE tunnel.

cpwVcMplsTeMappingTunnelInstance

Identifies an instance of the MPLS-TE tunnel.

cpwVcMplsTeMappingTunnelPeerLsrID

Identifies an Peer LSR when the outer tunnel is MPLS-TE based.

cpwVcMplsTeMappingTunnelLocalLsrID

Identifies the local LSR.

cpwVcMplsTeMappingVcIndex

The value that represent the VC in the cpwVcTable.

cpwVcMplsGroup

Collection of objects needed for PW VC over MPLS PSN configuration.

cpwVcMplsOutboundGroup

Collection of objects needed for outbound association of VC and MPLS tunnel.

cpwVcMplsInboundGroup

Collection of objects needed for inbound association of VC and MPLS tunnel. This group is mandatory if strict mode is implemented.

cpwVcMplsMappingGroup

Collection of objects used for mapping of tunnels and VC labels to VC index.