CISCO-FCS-MIB Download

fcsVsanDiscoverySpinLock

This object is used to facilitate modification of fcsVsanDiscoveryList2k, fcsVsanDiscovery- List4k, fcsVsanDiscoveryName and fcsStartDiscovery objects by multiple managers. The procedure for modifying the above four objects is as follows: 1. Determine ne ...

fcsVsanDiscoveryName

The name of the discovery triggered by a manager. This object is sent along with the fcsDiscoveryCompleteNotify notification. This object cannot be modified when the discovery status is 'inProgress' on the selected set of VSANs as indicated by the fcsDisc ...

fcsVsanDiscoveryList2k

A bitmap which represents VSANs starting from VSAN id 1 to VSAN id 2048. Discovery will be carried out on all those VSANs for which the corresponding bits are set to 1 in this object. Note that if multiple managers set this object one after the other, the ...

fcsVsanDiscoveryList4k

A bitmap which represents VSANs starting from VSAN id 2049 to VSAN id 4096. Discovery will be carried out on all those VSANs for which the corresponding bits are set to 1 in this object. Note that if multiple managers set this object one after the other, ...

fcsStartDiscovery

This object specifies whether a discovery cycle should be started by the Fabric Configuration Server. If this object is set to 'startDiscovery', then the discovery is started by the Fabric Configuration Server on those VSANs that have been specified by th ...

fcsDiscoveryStatusTable

This table contains the status of the discovery for all VSANs.

fcsDiscoveryStatusEntry

An entry (conceptual row) in this table. The discovery status for a particular VSAN.

fcsDiscoveryStatus

The status of the discovery on the local switch. Initially when the switch comes up, this object will be set to 'databaseInvalid' state on all VSANs. This indicates that a discovery needs to be done. If the manager sets the fcsStartDiscovery object to 'st ...

fcsDiscoveryCompleteTime

This object contains the value of sysUpTime when the last discovery was completed on this VSAN. This object will contain the value of zero before the first discovery on this VSAN.

fcsVsanDiscoveryTimeOut

The minimum interval of time for which the discovered data on a VSAN is cached by the Fabric Configuration Server.

fcsDiscoveryInvalidateCache2k

A bitmap which represents VSANs from 1 to 2048. The discovered cache will be invalidated on those VSANs for which the corresponding bits are set to 1 in this object. If the bit corresponding to a particular VSAN is set to 1 and if the value of fcsDiscover ...

fcsDiscoveryInvalidateCache4k

A bitmap which represents VSANs from 2049 to 4096. The discovered cache will be invalidated on those VSANs for which the corresponding bits are set to 1 in this object. If the bit corresponding to a particular VSAN is set to 1 and if the value of fcsDisco ...

fcsIeNumber

The number of entries currently present in the fcsIeTable.

fcsIeTable

A table of Interconnect Elements. Interconnect Elements (IEs) are switches, hubs, bridges etc. By default, the Fabric Configuration Server will maintain detailed information pertaining only to the local switch. As far as remote topology is concerned, only ...

fcsIeEntry

An entry (coneptual row) in this table. It gives information on an Interconnect Element.

fcsIeName

The WWN of an Interconnect Element. This object uniquely identifies an Interconnect Element on a VSAN. If the IE is a switch, then this object is the Node WWN of the switch.

fcsIeType

The type of this Interconnect Element.

fcsIeDomainId

The Domain Id of this Interconnect Element. If the Domain Id has not been configured, then this object will have the value of zero.

fcsIeMgmtId

The management identifer of this Interconnect Element. If the Interconnect Element is a switch, then this object will be the Domain Controller identifier of the switch. If the value of this object is unknown to the local system, then it will contain the n ...

fcsIeFabricName

The fabric name of this Interconnect Element. If the value of this object is unknown to the local system, then it will contain the null value x'00 00 00 00 00 00 00 00'.

fcsIeLogicalName

The logical name of this Interconnect Element. If the value of this object is unknown to the local system, then it will contain the zero length string.

fcsIeMgmtAddrListIndex

The index of the management address list corresponding to this Interconnect Element. This object is an index into the fcsMgmtAddrListTable. Zero or more of the management address objects may be associated with an Interconnect Element object.

fcsIeInfoList

The information list corresponding to this Interconnect Element. This object contains multiple substrings: the vendor name, model name/number, release code and any vendor specific information. Each substring is terminated with a null x'00'.

fcsIePortListIndex

The index of the port list corresponding to this Interconnect Element. This object is an index into the fcsPortListTable.

fcsMgmtAddrListTable

This table contains the set of management address lists currently referenced by any instance of the fcsIeMgmtAddrListIndex or fcsPlatformMgmtAddrListIndex objects.

fcsMgmtAddrListEntry

An entry (conceptual row) in this table. A management address is represented by fcsMgmtAddrIndex. All management addresses which belong to the same list have a common fcsMgmtAddrListIndex.

fcsMgmtAddrListIndex

The index of the management address list.

fcsMgmtAddrIndex

The index of a management address.

fcsMgmtAddr

The management address corresponding to this entry. The format of this object may be based on the format of the Uniform Resource Locator (URL). For example, SNMP - snmp://ipaddress[:port#]. This object MUST be set to a valid value before or concurrently w ...

fcsMgmtAddrConfigSource

The source of configuration of this entry. Note that an entry which is configured via GS3 cannot be deleted through SNMP.

fcsMgmtAddrRowStatus

The status of this conceptual row.

fcsPortListTable

This table contains all the lists of ports that are associated with Interconnect Elements contained in fcsIeTable.

fcsPortListEntry

An entry (conceptual row) in this table. A port is represented by fcsPortName. All the ports that belong to the same list have the same fcsPortListIndex.

fcsPortListIndex

The index of the port list.

fcsPortNumber

The number of entries currently present in the fcsPortTable.

fcsPortTable

This table contains information of all the ports. These ports are grouped into lists by the fcsPortListTable.

fcsPortEntry

An entry (conceptual row) in this table.

fcsPortName

The WWN of the port for which this row contains information.

fcsPortType

The type of this port. If it is a trunk port, the type of the port will be tePort. This is however not a standard port type. When information regarding such a port is sent using GS-3, it is represented in the GS-3 message and therefore in this table as an ...

fcsPortTXType

The TX type of this port.

fcsPortModuleType

The module type of this port.

fcsPortPhyPortNum

The physical number corresponding to this port entry.

fcsPortAttachPortNameIndex

The index of the attached port name list corresponding to this port entry. This object is an index into the fcsAttachPortNameListTable.

fcsPortState

The state of this port.

fcsAttachPortNameListTable

This table contains all the lists of attach port names.

fcsAttachPortNameListEntry

An entry (conceptual row) in this table. An Attached port name is represented by fcsAttachPortName. All the attach port names that belong to the same list have a common fcsAttachPortNameListIndex.

fcsAttachPortNameListIndex

The index of the attach port name list.

fcsAttachPortName

The attached port name corresponding to this entry. Zero or more of these names may be associated with a port object. The first 8 bytes of this object contain the WWN of the port followed by 2 reserved bytes. Following this is one byte of Port flags and o ...

fcsPlatformNumber

The number of entries currently present in the fcsPlatformTable.

fcsPlatformTable

This table contains information on platforms. By default, this table only contains information pertaining to the local switch. If a discovery is triggered, this table will contain all the information that was obtained from the discovery process. The infor ...

fcsPlatformEntry

An entry (conceptual row) in this table. A platform is uniquely represented by fcsPlatformIndex. There could be multiple platforms on a VSAN. A platform can contain multiple nodes. The node lists need to be created in the fcsNodeNameListTable. The fcsPlat ...

fcsPlatformIndex

The index of this platform.

fcsPlatformName

The name of this platform. The name should be unique within a VSAN. This object cannot be modified while the value of the corresponding instance of fcsPlatformRowStatus is 'active'. This object MUST be set before or concurrently with setting the correspon ...

fcsPlatformType

The type of this platform.

fcsPlatformNodeNameListIndex

The index of the node name list corresponding to this platform entry. This object is an index into the fcsNodeNameListTable. The list of nodes that a platform contains should be unique within a VSAN. If this entry is configured via SNMP as indicated by th ...

fcsPlatformMgmtAddrListIndex

The index of the management address list corresponding to this Platform. This object is an index into the fcsMgmtAddrListTable. Zero or more of the management address objects may be associated with a Platform object. If this entry is configured via SNMP a ...

fcsPlatformConfigSource

The source of configuration of this entry. Note that an entry which is configured via GS3 cannot be deleted through SNMP.

fcsPlatformValidation

This object specifies whether the validation for the platform name and its constituent nodes should be done on a fabric-wide basis. The outcome of this validation will be present in the corresponding instance of fcsPlatformValidationResult. No action is t ...

fcsPlatformValidationResult

The result of the fabric-wide validation of this platform. If the name of the platform is not unique fabric-wide on this VSAN, then this object will contain the value 'nameInvalid'. If the list of nodes present in the platform is not unique, then this obj ...

fcsPlatformRowStatus

The status of this conceptual row.

fcsNodeNameListTable

This table contains all the lists of nodes.

fcsNodeNameListEntry

An entry (conceptual row) in this table. Each node is represented uniquely by fcsNodeName. All nodes that belong to the same list have a common fcsNodeNameListIndex.

fcsNodeNameListIndex

The index of the node name list.

fcsNodeName

The name of this node entry.

fcsNodeNameConfigSource

The source of configuration of this entry. Note that an entry configured via GS-3 cannot be deleted through SNMP.

fcsNodeNameRowStatus

The status of this conceptual row.

fcsTotalRejects

The total number of requests rejected by the local switch across all VSANs.

fcsStatsTable

This table contains all the statistics related to the Fabric Configuration Server.

fcsStatsEntry

An entry (conceptual row) in this table. Some statistics for a particular VSAN.

fcsRxGetReqs

The number of Get Requests received by the Fabric Configuration Server on this VSAN.

fcsTxGetReqs

The number of Get Requests sent by the Fabric Configuration Server on this VSAN to other servers in the fabric.

fcsRxRegReqs

The number of Registration Requests received by the Fabric Configuration Server on this VSAN.

fcsTxRegReqs

The number of Registration Requests sent by the Fabric Configuration Server on this VSAN.

fcsRxDeregReqs

The number of Deregistration Requests received by the Fabric Configuration Server on this VSAN.

fcsTxDeregReqs

The number of Deregistration Requests sent by the Fabric Configuration Server on this VSAN.

fcsTxRscns

The number of Registered State Change Notifications (RSCNs) sent by the Fabric Configuration Server on this VSAN.

fcsRxRscns

The number of Registered State Change Notifications (RSCNs) received by the Fabric Configuration Server on this VSAN.

fcsRejects

The total number of requests rejected by the local switch on this VSAN.

fcsRejReasonCode

This object contains the reason code corresponding to the latest Fabric Configuration Server request rejected by the local system.

fcsRejReasonCodeExplanation

This object contains the reason code explanation if the reason code is 'Unable to perform command req'. This object also corresponds to the latest Fabric Configuration Server request rejected by the local system.

fcsMgmtAddrChangeVsanIndex

Represents the VSAN id on which a management address change has been detected.

fcsMgmtAddrChangeIeName

Represents the IE for which a management address change has been detected.

fcsReqRejNotifyEnable

This object specifies if the Fabric Configuration Server should issue a 'fcsReqRejNotify' notification. If the value of this object is 'true', then the notification is issued. If the value of this object is 'false', then the notification is not issued.

fcsDiscoveryCompleteNotifyEnable

This object specifies if the Fabric Configuration Server should issue a 'fcsDiscoveryCompleteNotify' notification. If the value of this object is 'true', then the notification is issued. If the value of this object is 'false', then the notification is not ...

fcsConfigurationGroup

A collection of objects for displaying and configuring Fabric Configuration Server parameters.

fcsStatisticsGroup

A collection of objects for displaying the Fabric Configuration Server statistics information.

fcsNotificationControlGroup

A collection of notification control and notification information objects for monitoring Fabric Configuration Server request rejection and discovery of remote toplogy information.

fcsNotificationControlGroupRev1

A collection of notification control and notification information objects for monitoring Fabric Configuration Server request rejection and discovery of remote toplogy information.