CISCO-ENTITY-SENSOR-MIB Download
The CISCO-ENTITY-SENSOR-MIB is used to monitor
the values of sensors in the Entity-MIB (RFC 2037)
entPhysicalTable.
IPHost Network Monitor offer an easy way of SNMP monitoring your Cisco Servers, Routers, Switches, Bridges,
Firewalls, Repeaters.
OID list for CISCO-ENTITY-SENSOR-MIB
- entSensorValueTable
- This table lists the type, scale, and present value of a sensor listed in the Entity-MIB entPhysicalTable.
- entSensorValueEntry
- An entSensorValueTable entry describes the present reading of a sensor, the measurement units and scale, and sensor operational status.
- entSensorType
- This variable indicates the type of data reported by the entSensorValue. This variable is set by the agent at start-up and the value does not change during operation.
- entSensorScale
- This variable indicates the exponent to apply to sensor values reported by entSensorValue. This variable is set by the agent at start-up and the value does not change during operation.
- entSensorPrecision
- This variable indicates the number of decimal places of precision in fixed-point sensor values reported by entSensorValue. This variable is set to 0 when entSensorType is not a fixed-point type: voltsAC(1), voltsDC(2), amperes(3), watts(4), hertz(5), cel ...
- entSensorValue
- This variable reports the most recent measurement seen by the sensor. To correctly display or interpret this variable's value, you must also know entSensorType, entSensorScale, and entSensorPrecision. However, you can compare entSensorValue with the thres ...
- entSensorValueTimeStamp
- This variable indicates the age of the value reported by entSensorValue
- entSensorValueUpdateRate
- This variable indicates the rate that the agent updates entSensorValue.
- entSensorMeasuredEntity
- This object identifies the physical entity for which the sensor is taking measurements. For example, for a sensor measuring the voltage output of a power-supply, this object would be the entPhysicalIndex of that power-supply; for a sensor measuring the t ...
- entSensorThresholdTable
- This table lists the threshold severity, relation, and comparison value, for a sensor listed in the Entity-MIB entPhysicalTable.
- entSensorThresholdEntry
- An entSensorThresholdTable entry describes the thresholds for a sensor: the threshold severity, the threshold value, the relation, and the evaluation of the threshold. Only entities of type sensor(8) are listed in this table. Only pre-configured threshold ...
- entSensorThresholdIndex
- An index that uniquely identifies an entry in the entSensorThresholdTable. This index permits the same sensor to have several different thresholds.
- entSensorThresholdSeverity
- This variable indicates the severity of this threshold.
- entSensorThresholdRelation
- This variable indicates the relation between sensor value (entSensorValue) and threshold value (entSensorThresholdValue), required to trigger the alarm. when evaluating the relation, entSensorValue is on the left of entSensorThresholdRelation, entSensorT ...
- entitySensorValueGroup
- The collection of objects which are used to describe and monitor values of Entity-MIB entPhysicalTable entries of sensors. ::= { entitySensorMIBGroups 1 } OBJECTS { entSensorThresholdSeverity, entSensorThresholdRelation, entSensorThresholdValue, entSensor ...
- entitySensorValueGroupSup1
- The collection of objects which are used to describe and track the measured entities of ENTITY-MIB entPhysicalTable.
- entitySensorNotifCtrlGlobalGroup
- The collection of objects which provide the global notification control on entSensorThresholdNotification.
Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.
