CISCO-DIAMETER-BASE-PROTOCOL-MIB

CISCO-DIAMETER-BASE-PROTOCOL-MIB Download

MIBs list

This MIB describes the SNMP MIB objects that are supported pertaining to theDiameter Base Protocol Configs/Stats.

IPHost Network Monitor offer an easy way of SNMP monitoring your Cisco Servers, Routers, Switches, Bridges, Firewalls, Repeaters.

OID list for CISCO-DIAMETER-BASE-PROTOCOL-MIB

ciscoDiaBaseProtEnableProtocolErrorNotif
Setting the value of this object to true(1) enables the ciscoDiaBaseProtProtocolErrorNotif notification.
ciscoDiaBaseProtEnableTransientFailureNotif
Setting the value of this object to true(1) enables the ciscoDiaBaseProtTransientFailureNotif notification.
ciscoDiaBaseProtEnablePermanentFailureNotif
Setting the value of this object to true(1) enables the ciscoDiaBaseProtPermanentFailureNotif notification.
ciscoDiaBaseProtEnablePeerConnectionDownNotif
Setting the value of this object to true(1) enables the ciscoDiaBaseProtPeerConnectionDownNotif notification.
ciscoDiaBaseProtEnablePeerConnectionUpNotif
Setting the value of this object to true(1) enables the ciscoDiaBaseProtPeerConnectionUpNotif notification.
cdbpLocalId
The implementation identification string for the Diameter software in use on the system, for example; 'diameterd'
cdbpLocalIpAddrTable
The table listing the Diameter local host's IP Addresses.
cdbpLocalIpAddrEntry
A row entry representing a Diameter local host IP Address.
cdbpLocalIpAddrIndex
A number uniquely identifying the number of IP Addresses supported by this Diameter host.
cdbpLocalIpAddrType
The type of internet address stored in cdbpLocalIpAddress.
cdbpLocalIpAddress
The IP-Address of the host, which is of the type specified in cdbpLocalIpAddrType.
cdbpLocalTcpListenPort
This object represents Diameter TCP 'listen' port.
cdbpLocalSctpListenPort
This object represents Diameter SCTP 'listen' port.
cdbpLocalOriginHost
This object represents the Local Origin Host.
cdbpLocalRealm
This object represents the Local Realm Name.
cdbpRedundancyEnabled
This parameter indicates if cisco redundancy has been enabled, it is enabled if set to true and disabled if set to false.
cdbpRedundancyInfraState
This parameter indicates the current state of cisco redundancy infrastructure state. rfUnknown(0) - unknown state rfDisabled(1) - RF is not functioning at this time rfInitialization(2) - co-ordinating init with platform rfNegotiation ...
cdbpRedundancyLastSwitchover
This object represents the Last Switchover Time.
cdbpLocalApplTable
The table listing the Diameter applications supported by this server.
cdbpLocalApplEntry
A row entry representing a Diameter application on this server.
cdbpLocalApplIndex
A number uniquely identifying a supported Diameter application. Upon reload, cdbpLocalApplIndex values may be changed.
cdbpLocalApplStorageType
The storage type for this conceptual row. None of the columnar objects is writable when the conceptual row is permanent.
cdbpLocalApplRowStatus
The status of this conceptual row. To create a row in this table, a manager must set this object to either createAndGo(4) or createAndWait(5). Until instances of all corresponding columns are appropriately configured, the value of the corresponding instan ...
cdbpLocalVendorTable
The table listing the vendor IDs supported by local Diameter.
cdbpLocalVendorEntry
A row entry representing a vendor ID supported by local Diameter.
cdbpLocalVendorIndex
A number uniquely identifying the vendor ID supported by local Diameter. Upon reload, cdbpLocalVendorIndex values may be changed.
cdbpLocalVendorId
The active vendor ID used for peer connections. diameterVendorIetf(0) - Diameter vendor id ietf diameterVendorCisco(9) - Diameter vendor id cisco diameterVendor3gpp(10415) - Diameter vendor id 3gpp diameterVendorVodafone(12645) - Diamet ...
cdbpLocalVendorStorageType
The storage type for this conceptual row. None of the objects are writable when the conceptual row is permanent.
cdbpLocalVendorRowStatus
The status of this conceptual row. To create a row in this table, a manager must set this object to either createAndGo(4) or createAndWait(5). Until instances of all corresponding columns are appropriately configured, the value of the corresponding instan ...
cdbpAppAdvToPeerTable
The table listing the applications advertised by this host to each peer and the types of service supported: accounting, authentication or both.
cdbpAppAdvToPeerEntry
A row entry representing a discovered or configured Diameter peer server.
cdbpAppAdvToPeerVendorId
The IANA Enterprise Code value assigned to the vendor of the Diameter device.
cdbpAppAdvToPeerIndex
A number uniquely identifying the Diameter applications advertised as supported by this host to each peer. Upon reload, cdbpAppAdvToPeerIndex values may be changed.
cdbpAppAdvToPeerServices
The type of services supported for each application, accounting, authentication or both. acct(1) - accounting auth(2) - authentication both(3) - both accounting and authentication.
cdbpAppAdvToPeerStorageType
The storage type for this conceptual row. None of the objects are writable when the conceptual row is permanent.
cdbpAppAdvToPeerRowStatus
The status of this conceptual row. To create a row in this table, a manager must set this object to either createAndGo(4) or createAndWait(5). Until instances of all corresponding columns are appropriately configured, the value of the corresponding instan ...
cdbpLocalStatsTotalPacketsIn
The total number of packets received by Diameter Base Protocol.
cdbpLocalStatsTotalPacketsOut
The total number of packets transmitted by Diameter Base Protocol.
cdbpLocalStatsTotalUpTime
This object represents the total time the Diameter server has been up until now.
cdbpLocalResetTime
If the server keeps persistent state (e.g., a process) and supports a 'reset' operation (e.g., can be told to re-read configuration files), this value will be the time elapsed (in hundredths of a second) since the server was 'reset'. For software that do ...
cdbpLocalConfigReset
Status/action object to reinitialize any persistent server state. When set to reset(2), any persistent server state (such as a process) is reinitialized as if the server had just been started. This value will never be returned by a read operation. When ...
cdbpPeerTable
The table listing information regarding the discovered or configured Diameter peer servers.
cdbpPeerEntry
A row entry representing a discovered or configured Diameter peer server.
cdbpPeerIndex
A number uniquely identifying each Diameter peer with which the host server communicates. Upon reload, cdbpPeerIndex values may be changed.
cdbpPeerId
The server identifier for the Diameter peer. It must be unique and non-empty.
cdbpPeerPortConnect
The connection port this server used to connect to the Diameter peer. If there is no active connection, this value will be zero(0).
cdbpPeerPortListen
The port the server is listening on.
cdbpPeerProtocol
The transport protocol (tcp/sctp) the Diameter peer is using. tcp(1) - Transmission Control Protocol sctp(2) - Stream Control Transmission Protocol.
cdbpPeerSecurity
The security the Diameter peer is using. other(1) - Unknown Security Protocol. tls(2) - Transport Layer Security Protocol. ipsec(3) - Internet Protocol Security.
cdbpPeerFirmwareRevision
Firmware revision of peer. If no firmware revision, the revision of the Diameter software module may be reported instead.
cdbpPeerStorageType
The storage type for this conceptual row. Only cdbpPeerPortListen object is writable when the conceptual row is permanent.
cdbpPeerRowStatus
The status of this conceptual row. To create a row in this table, a manager must set this object to either createAndGo(4) or createAndWait(5). Until instances of all corresponding columns are appropriately configured, the value of the corresponding instan ...
cdbpPeerIpAddrTable
The table listing the Diameter server IP Addresses.
cdbpPeerIpAddrEntry
A row entry representing peer Diameter server IP Addresses.
cdbpPeerIpAddressIndex
A number uniquely identifying the number of IP Addresses supported by all Diameter peers.
cdbpPeerIpAddressType
The type of address stored in diameterPeerIpAddress.
cdbpPeerIpAddress
The active IP Address(es) used for connections.
cdbpAppAdvFromPeerTable
The table listing the applications advertised by each peer to this host and the types of service supported: accounting, authentication or both.
cdbpAppAdvFromPeerEntry
A row entry representing a discovered or configured Diameter peer server.
cdbpAppAdvFromPeerVendorId
The IANA Enterprise Code value assigned to the vendor of the Diameter device.
cdbpAppAdvFromPeerIndex
A number uniquely identifying the applications advertised as supported from each Diameter peer.
cdbpAppAdvFromPeerType
The type of services supported for each application, accounting, authentication or both. acct(1) - accounting auth(2) - authentication both(3) - both accounting and authentication.
cdbpPeerVendorTable
The table listing the Vendor IDs supported by the peer.
cdbpPeerVendorEntry
A row entry representing a Vendor ID supported by the peer.
cdbpPeerVendorIndex
A number uniquely identifying the Vendor ID supported by the peer. Upon reload, cdbpPeerVendorIndex values may be changed.
cdbpPeerVendorId
The active vendor ID used for peer connections. diameterVendorIetf(0) - Diameter vendor id ietf diameterVendorCisco(9) - Diameter vendor id cisco diameterVendor3gpp(10415) - Diameter vendor id 3gpp diameterVendorVodafone(12645) - Diamet ...
cdbpPeerVendorStorageType
The storage type for this conceptual row. None of the objects are writable when the conceptual row is permanent.
cdbpPeerVendorRowStatus
The status of this conceptual row. To create a row in this table, a manager must set this object to either createAndGo(4) or createAndWait(5). Until instances of all corresponding columns are appropriately configured, the value of the corresponding instan ...
cdbpPeerStatsTable
The table listing the Diameter peer statistics.
cdbpPeerStatsEntry
A row entry representing a Diameter peer.
cdbpPeerStatsState
Connection state in the Peer State Machine of the peer with which this Diameter server is communicating. closed(1) - Connection closed with this peer. waitConnAck(2) - Waiting for an acknowledgment from this peer. waitICEA(3) - Waiting for a Capab ...
cdbpPeerStatsStateDuration
This object represents the Peer state duration.
cdbpPeerStatsLastDiscCause
The last cause for a peers disconnection. rebooting(1) - A scheduled reboot is imminent. busy(2) - The peer's internal resources are constrained, and it has determined that the transport connection needs to be shutdown. doNotWantToTalk(3) ...
cdbpPeerStatsWhoInitDisconnect
Did the host or peer initiate the disconnect? host(1) - If this server initiated the disconnect. peer(2) - If the peer with which this server was connected initiated the disconnect.
cdbpPeerStatsDWCurrentStatus
This object indicates the connection status. okay(1) - Indicates the connection is presumed working. suspect(2) - Indicates the connection is possibly congested or down. down(3) - The peer is no longer reachable, causing the transport connection to ...
cdbpPeerStatsTimeoutConnAtmpts
If there is no transport connection with a peer, this is the number of times the server attempts to connect to that peer. This is reset on disconnection.
cdbpPeerStatsASRsIn
Abort-Session-Request messages received from the peer.
cdbpPeerStatsASRsOut
Abort-Session-Request messages sent to the peer.
cdbpPeerStatsASAsIn
Number of Abort-Session-Answer messages received from the peer.
cdbpPeerStatsASAsOut
Number of Abort-Session-Answer messages sent to the peer.
cdbpPeerStatsACRsIn
Number of Accounting-Request messages received from the peer.
cdbpPeerStatsACRsOut
Number of Accounting-Request messages sent to the peer.
cdbpPeerStatsACAsIn
Number of Accounting-Answer messages received from the peer.
cdbpPeerStatsACAsOut
Number of Accounting-Answer messages sent to the peer.
cdbpPeerStatsCERsIn
Number of Capabilities-Exchange-Request messages received from the peer.
cdbpPeerStatsCERsOut
Number of Capabilities-Exchange-Request messages sent to the peer.
cdbpPeerStatsCEAsIn
Number of Capabilities-Exchange-Answer messages received from the peer.
cdbpPeerStatsCEAsOut
Number of Capabilities-Exchange-Answer messages sent to the peer.
cdbpPeerStatsDWRsIn
Number of Device-Watchdog-Request messages received from the peer.
cdbpPeerStatsDWRsOut
Number of Device-Watchdog-Request messages sent to the peer.
cdbpPeerStatsDWAsIn
Number of Device-Watchdog-Answer messages received from the peer.
cdbpPeerStatsDWAsOut
Number of Device-Watchdog-Answer messages sent to the peer.
cdbpPeerStatsDPRsIn
Number of Disconnect-Peer-Request messages received.
cdbpPeerStatsDPRsOut
Number of Disconnect-Peer-Request messages sent.
cdbpPeerStatsDPAsIn
Number of Disconnect-Peer-Answer messages received.
cdbpPeerStatsDPAsOut
Number of Disconnect-Peer-Answer messages sent.
cdbpPeerStatsRARsIn
Number of Re-Auth-Request messages received.
cdbpPeerStatsRARsOut
Number of Re-Auth-Request messages sent.
cdbpPeerStatsRAAsIn
Number of Re-Auth-Answer messages received.
cdbpPeerStatsRAAsOut
Number of Re-Auth-Answer messages sent.
cdbpPeerStatsSTRsIn
Number of Session-Termination-Request messages received from the peer.
cdbpPeerStatsSTRsOut
Number of Session-Termination-Request messages sent to the peer.
cdbpPeerStatsSTAsIn
Number of Session-Termination-Answer messages received from the peer.
cdbpPeerStatsSTAsOut
Number of Session-Termination-Answer messages sent to the peer.
cdbpPeerStatsDWReqTimer
Device-Watchdog Request Timer, which is the interval between packets sent to peers.
cdbpPeerStatsRedirectEvents
Redirect Event count, which is the number of redirects sent from a peer.
cdbpPeerStatsAccDupRequests
The number of duplicate Diameter Accounting-Request packets received.
cdbpPeerStatsMalformedReqsts
The number of malformed Diameter packets received.
cdbpPeerStatsAccsNotRecorded
The number of Diameter Accounting-Request packets which were received and responded to but not recorded.
cdbpPeerStatsAccRetrans
The number of Diameter Accounting-Request packets retransmitted to this Diameter server.
cdbpPeerStatsTotalRetrans
The number of Diameter packets retransmitted to this Diameter server, not to include Diameter Accounting-Request packets retransmitted.
cdbpPeerStatsAccPendReqstsOut
The number of Diameter Accounting-Request packets sent to this peer that have not yet timed out or received a response. This variable is incremented when an Accounting-Request is sent to this server and decremented due to receipt of an Accounting-Response ...
cdbpPeerStatsAccReqstsDropped
The number of Accounting-Requests to this server that have been dropped.
cdbpPeerStatsHByHDropMessages
An answer message that is received with an unknown hop-by-hop identifier. Does not include accounting requests dropped.
cdbpPeerStatsEToEDupMessages
Duplicate answer messages that are to be locally consumed. Does not include duplicate accounting requests received.
cdbpPeerStatsUnknownTypes
The number of Diameter packets of unknown type which were received.
cdbpPeerStatsProtocolErrors
This object represents the Number of protocol errors returned to peer, but not including redirects.
cdbpPeerStatsTransientFailures
This object represents the transient failure count.
cdbpPeerStatsPermanentFailures
This object represents the Number of permanent failures returned to peer.
cdbpPeerStatsTransportDown
This object represents the Number of unexpected transport failures.
cdbpRealmKnownPeersTable
The table listing the Diameter realms and known peers.
cdbpRealmKnownPeersEntry
A row entry representing a Diameter realm and known peers.
cdbpRealmKnownPeersIndex
A number uniquely identifying a peer known to this realm. Upon reload, cdbpRealmKnownPeersIndex values may be changed.
cdbpRealmKnownPeers
The index of the peer this realm knows about. This is an ordered list, where the ordering signifies the order in which the peers are tried. Same as the cdbpPeerIndex
cdbpRealmKnownPeersChosen
How the realm chooses which peer to send packets to. roundRobin(1) - The peer used for each transaction is selected based on the order in which peers are configured. loadBalance(2) - The peer used for each transaction is based on the load metric ...
cdbpRealmMessageRouteTable
The table listing the Diameter realm-based message route information.
cdbpRealmMessageRouteEntry
A row entry representing a Diameter realm based message route server.
cdbpRealmMessageRouteIndex
A number uniquely identifying each realm.
cdbpRealmMessageRouteRealm
This object represents the realm name
cdbpRealmMessageRouteApp
Application id used to route packets to this realm.
cdbpRealmMessageRouteType
The types of service supported for each realm application: accounting, authentication or both. acct(1) - accounting auth(2) - authentication both(3) - both accounting and authentication.
cdbpRealmMessageRouteAction
The action is used to identify how a message should be treated based on the realm, application and type. local(1) - Diameter messages that resolve to a route entry with the Local Action set to Local can be satisfied locally, and do not need to be route ...
cdbpRealmMessageRouteACRsIn
Number of Accounting-Request messages received from the realm.
cdbpRealmMessageRouteACRsOut
Number of Accounting-Request messages sent to the realm.
cdbpRealmMessageRouteACAsIn
Number of Accounting-Answer messages received from the realm.
cdbpRealmMessageRouteACAsOut
Number of Accounting-Answer messages sent to the realm.
cdbpRealmMessageRouteRARsIn
Number of Re-Auth-Request messages received from the realm.
cdbpRealmMessageRouteRARsOut
Number of Re-Auth-Request messages sent to the realm.
cdbpRealmMessageRouteRAAsIn
Number of Re-Auth-Answer messages received from the realm.
cdbpRealmMessageRouteRAAsOut
Number of Re-Auth-Answer messages sent to the realm.
cdbpRealmMessageRouteSTRsIn
Number of Session-Termination-Request messages received from the realm.
cdbpRealmMessageRouteSTRsOut
Number of Session-Termination-Request messages sent to the realm.
cdbpRealmMessageRouteSTAsIn
Number of Session-Termination-Answer messages received from the realm.
cdbpRealmMessageRouteSTAsOut
Number of Session-Termination-Answer messages sent to the realm.
cdbpRealmMessageRouteASRsIn
Number of Abort-Session-Request messages received from the realm.
cdbpRealmMessageRouteASRsOut
Number of Abort-Session-Request messages sent to the realm.
cdbpRealmMessageRouteASAsIn
Number of Abort-Session-Answer messages received from the realm.
cdbpRealmMessageRouteASAsOut
Number of Abort-Session-Answer messages sent to the realm.
cdbpRealmMessageRouteAccRetrans
The number of Diameter accounting packets retransmitted to this realm.
cdbpRealmMessageRouteAccDupReqsts
The number of duplicate Diameter accounting packets sent to this realm.
cdbpRealmMessageRoutePendReqstsOut
The number of Diameter Accounting-Request packets sent to this peer that have not yet timed out or received a response. This variable is incremented when an Accounting-Request is sent to this server and decremented due to receipt of an Accounting-Response ...
cdbpRealmMessageRouteReqstsDrop
The number of requests dropped by this realm.
ciscoDiameterBasePMIBLocalCfgGroup
A collection of objects providing configuration common to the server.
ciscoDiameterBasePMIBPeerCfgGroup
A collection of objects providing configuration of the Diameter peers.
ciscoDiameterBasePMIBPeerStatsGroup
A collection of objects providing statistics of the Diameter peers.
ciscoDiameterBasePMIBTrapCfgGroup
A collection of objects providing configuration for base protocol notifications.
ciscoDiameterBasePMIBLocalCfgSkippedGroup
A collection of objects providing configuration common to the server.
ciscoDiameterBasePMIBLocalStatsSkippedGroup
A collection of objects providing statistics common to the server.
ciscoDiameterBasePMIBPeerCfgSkippedGroup
A collection of objects providing configuration for Diameter peers.
ciscoDiameterBasePMIBPeerStatsSkippedGroup
A collection of objects providing statistics of Diameter peers.
ciscoDiameterBasePMIBRealmCfgSkippedGroup
A collection of objects providing configuration for realm message routing.
ciscoDiameterBasePMIBRealmStatsSkippedGroup
A collection of objects providing statistics of realm message routing.

Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.

MIBs list