CISCO-CABLE-WIDEBAND-MIB Download

ccwbRFChannelTable

This table contains attributes of the physical RF channels. MPEG-TS packets are sent across RF channels within a wideband channel. These physical RF channels might be present on a different system but the WCMTS entity requires the knowledge of that system ...

ccwbRFChannelEntry

An entry provides a list of attributes for a single downstream RF channel per WCMTS entity. An entry in this table exists for each configured RF channel on the WCMTS entity that provides the wideband DOCSIS functionality. The index, entPhysicalIndex, used ...

ccwbRFChannelNum

The WCMTS identification of the RF channel. The range of this object is limited to 0-18 in the case of annex A/256qam, and 0-23 for Annex B and C.

ccwbRFChannelFrequency

The center of the downstream frequency associated with this RF channel. The final downstream RF frequency may be provided by an edge QAM device or the CMTS itself. See the associated compliance object for a description of valid frequencies that may be wri ...

ccwbRFChannelWidth

The bandwidth of this downstream RF channel. Most implementations are expected to support a channel width of 6 MHz (North America) and/or 8 MHz (Europe). See the associated compliance object for a description of the valid channel widths for this object.

ccwbRFChannelModulation

The modulation type associated with this downstream RF channel. See the associated conformance object for write conditions an limitations. See the DOCSIS specification for specifics on the modulation profiles implied by qam64 qam256 and qam1024. qam64, qa ...

ccwbRFChannelAnnex

The value of this object indicates the conformance of the implementation to important regional cable standards. annexA : Annex A from ITU-J83 is used. annexB : Annex B from ITU-J83 is used. annexC : Annex C from ITU-J83 is used.

ccwbRFChannelMpegPkts

The number of MPEG packets transmitted on this RF channel.

ccwbRFChannelStorageType

The storage type for this conceptual row.

ccwbRFChannelRowStatus

Controls and reflects the status of rows in this table. It can be used for creating and deleting entries in this table. The ccwbRFChannelAnnex and ccwbRFChannelModulation must be valid for a row to be created.

ccwbRFChannelUtilization

The calculated and truncated utilization for this RF channel over the previous complete measuring interval. The configured duration of the measurement intervals is defined in the ccwbRFChanUtilInterval object. The utilization index is a percentage express ...

ccwbRFChannelFrequencyRev1

The center of the downstream frequency associated with this RF channel. The final downstream RF frequency may be provided by an edge QAM device or the CMTS itself. See the associated compliance object for a description of valid frequencies that may be wri ...

ccwbRFChannelQamTable

This table contains information of the external edge QAM which provide the physical RF channels which are available to the wideband channels.

ccwbRFChannelQamEntry

An entry provides a list of attributes for a single RF channel which can be physically present on an external edge QAM device. An entry in this table exists for each configured RF channel on the WCMTS module that provides the wideband DOCSIS functionality ...

ccwbRFChanQamIPAddressType

The type of internet address. This object identifies the internet address type specified by ccwbRFChanQamIPAddress object.

ccwbRFChanQamIPAddress

The IP address of the edge QAM device or the CMTS cable interface which provides the physical RF channel. The IP address will be of the type represented by object ccwbRFChanQamIPAddressType.

ccwbRFChanQamMacAddress

The MAC address of the edge QAM device or next hop router which might be present between the WCMTS and the edge QAM.

ccwbRFChanQamUdpPort

The port number on the edge QAM associated with this RF channel.

ccwbRFChanQamTos

The value of the TOS field in the IP header for all Ethernet frames destined for the given RF channel.

ccwbRFChanQamVlanId

The VLAN ID to be inserted in the Ethernet frames when using 802.1q frames instead of normal 802.1 frames for the given RF channel. The value of 0 indicates that 802.1 frames are being used and is not supported in setting this object.

ccwbRFChanQamPriorityBits

The priority bits used when inserting Ethernet 802.1q VLAN tags into the Ethernet frames destined for a given RF channel. Priority Bits (0=Best effort, 1=background, 2=spare, 3=excellent effort, 4=controlled load, 5=video, 6=voice, 7=network control).

ccwbRFChanQamDepiRemoteId

The DEPI remote ID on edge QAM associated with this RF channel.

ccwbWBtoRFMappingTable

A wideband channel is a logical grouping of one or more physical RF channels over which Wideband MPEG-TS packets are carried. This table contains association information of the wideband channels to the RF channels that are available for the WCMTS.

ccwbWBtoRFMappingEntry

An entry provides a list of attributes for a single association between a wideband channel and a RF channel. An entry in this table exists for each association between a wideband channel and RF channel on the WCMTS. It is indexed by the ifIndex of the wid ...

ccwbWBtoRFBandwidth

The percentage of the RF channel bandwidth allocated for this wideband channel.

ccwbWBtoRFStorageType

The storage type for this conceptual row.

ccwbWBtoRFRowStatus

Controls and reflects the status of rows in this table. It can be used for creating and deleting entries in this table. The ccwbWBtoRFBandwidth must be valid for a row to be created. When ccwbWBtoRFRowStatus is 'active', the object ccwbWBtoRFBandwidth can ...

ccwbWBtoNBMappingTable

This table contains information of the mapping of the wideband channels to the Narrowband channels that are available on the WCMTS. The wideband protocol utilizes the existing narrowband downstream channel for carrying the MAC management and signaling mes ...

ccwbWBtoNBMappingEntry

An entry provides a list of attributes for a association between a wideband channel and a narrowband channel. An entry in this table exists for each association between a wideband channel and narrowband channel on the WCMTS. The valid ifType for the ifInd ...

ccwbWBtoNBifIndexForNB

The ifIndex of the narrowband cable interface associated with this wideband channel.

ccwbWBtoNBStorageType

The storage type for this conceptual row.

ccwbWBtoNBRowStatus

Controls and reflects the status of rows in this table. It can be used for creating and deleting entries in this table. The object ccwbWBtoNBifIndexForNB must be valid in order for row to be created.

ccwbWBBondGrpTable

This table provides information about a Wideband BG interface, whether its configured to carry multicast or non-multicast traffic. For multicast the BG interface type is Secondary and for non-multicast its non-Secondary. Other objects could be added to th ...

ccwbWBBondGrpEntry

An entry in this table provides information about each Wideband BG interface whose ifType is ciscoDocsCableWBDownstream(224).

ccwbWBBondGrpSecondary

This object has the value 'true(1)' if the WB interface(BG) is Seconday and the value 'false(2)' for non-Secondary.

ccwbWBCmStatusTable

This table contains Wideband Cable Modem(WCM) connectivity state. A WCM connectivity state can be associated with multiple Wideband interfaces.

ccwbWBCmStatusEntry

Status information for a single Wideband Cable Modem. An entry in this table exists for each Wideband Cable Modem that is connected to the WCMTS.

ccwbWBCmStatusValue

Current WB Cable Modem connectivity state, as specified in the RF Interface Specification. Returned status information is the WCM status as assumed by the WCMTS, and indicates the following events: The enumerations are: offline(1) : modem c ...

ccwbWBCmStatusExtTable

An entry in this table exists for each Wideband Cable Modem which links to one or more WB interface.

ccwbWBCmStatusExtEntry

This entry exists for each Wideband Cable Modem(WCM) which links to one or more WB interface.

ccwbWBCmStatusExtIndex

The value of this object uniquely identifies an association between a WCM and a BG.

ccwbWBCmWBIfindex

ifIndex of the wideband channel associated with the WCM.

ccwbFiberNodeDescrTable

This table contains the description of a Fiber Node on a CMTS. An entry in this table exists for each FiberNode ID.

ccwbFiberNodeDescrEntry

This entry provides the description of each fiber node on the CMTS and it is part of the Fiber node configuration.

ccwbFiberNodeDescription

This object contains the user configured description string of the fiber node.

ccwbFiberNodeDescrStorageType

The storage type for this conceptual row.

ccwbFiberNodeDescrRowStatus

Controls and reflects the status of rows in this table. It can be used for creating and deleting entries in this table. ccwbFiberNodeDescription must not be null in order for row to be created.

ccwbFiberNodeTable

This table provides configuration information of each Fiber node. It will provide topology information of each Fiber node, which includes information such as, Narrowband and Wideband QAMs.

ccwbFiberNodeEntry

An entry in this table exists for each FiberNode ID that is in use. It uses two indices, i.e. ccwbFiberNodeID which is the Fiber node ID, and ccwbFiberNodeGlobRFID, which is the combined bit mask of Narrowband RF channels and Wideband rf-ports(rf-channels ...

ccwbFiberNodeID

This object represents the Fiber node ID. Each Fiber node configuration on the CMTS is assigned a unique Fiber node ID.

ccwbFiberNodeGlobRFID

This is the RF ID of both Narrowband and Wideband QAMs(rf-channels) combined.

ccwbFiberNodeNBIfIndx

This object represents the Narrowband Ifindex of the RF downstream channel which is part of the Fiber node configuation.

ccwbFiberNodeWBContlrPhyIndx

This object represents the entity physical index of Wideband controller card. This card contains the RF port which is part of the ccwbFiberNodeGlobRFID bit mask. A value of zero means the index is invalid. ccwbFiberNodeWBRFPort and ccwbFiberNodeWBContlrPh ...

ccwbFiberNodeWBRFPort

This object represents the RF downstream channel IDs (rf-ports) of the wideband controller card. Each Wideband controller can have 24 RF channels. ccwbFiberNodeWBRFPort and ccwbFiberNodeWBContlrPhyIndx are mutually inclusive.

ccwbFiberNodeStorageType

The storage type for this conceptual row.

ccwbFiberNodeRowStatus

Controls and reflects the status of rows in this table. It can be used for creating and deleting entries in this table.

ccwbRFChanUtilInterval

The time interval in seconds over which the RF channels utilization index is calculated. All RF channels use the same interval. Setting a value of zero disables utilization reporting. This value should be persisted accross CMTS reinitializations.

ccwbWidebandObjGroup

Group of objects implemented in WCMTS providing for Wideband DOCSIS feature.

ccwbWidebandObjGroupSup1

Group of objects implemented in WCMTS for RF channel utilization calculation.

ccwbWidebandObjGroupRev1

Group of objects implemented in WCMTS providing for Wideband DOCSIS feature.