CISCO-C8500-REDUNDANCY-MIB Download
This MIB allows management of redundancy of CPU and switch cards for
the Catalyst 8540 switch, and other products with similar
implementations.
IPHost Network Monitor offer an easy way of SNMP monitoring your Cisco Servers, Routers, Switches, Bridges,
Firewalls, Repeaters.
OID list for CISCO-C8500-REDUNDANCY-MIB
- ccrCpuTable
- There is an entry in this table for each slot that can hold a CPU card.
- ccrCpuEntry
- Redundancy information for a CPU card.
- ccrCpuSlotIndex
- Identifies a chassis slot.
- ccrCpuMode
- The redundancy mode of this CPU card.
- ccrCpuStatus
- The operational status of this CPU card.
- ccrSyncConfigOnSet
- The device's running-configuration and startup-configuration both reside on the active CPU card. This object indicates whether these configurations should be copied from the active CPU to the standby CPU whenever they change. It is acceptable to copy ei ...
- ccrCpuStandbyEnableMode
- This object is used to allow or disallow the execution of the enable exec command on the secondary CPU. When set to 'true', the enable exec command can be executed on secondary CPU, and the user may enter enable mode after keying in the password configure ...
- ccrCpuSwitchoverTime
- The time taken for the most recent CPU switchover.
- ccrForceCounterSync
- This object is used to force the synchronization of counters from primary CPU to secondary CPU. It should generally be set just before a controlled Route Processor Switchover. When this object is retrieved, the value 'noop' is returned. When this object ...
- ccrIfCounterSyncFreq
- This object configures the periodicity of interface counter synchronization from primary CPU to secondary CPU. Setting this object to 0 will disable counter synchronization.
- ccrVcCounterSyncFreq
- This object configures the periodicity of Virtual Circuit (VC) counter synchronization from primary CPU to secondary CPU. Setting this object to 0 will disable counter synchronization.
- ccrSigCounterSyncEnable
- This object configures the synchronization of ATM Signalling Statistics from primary CPU to secondary CPU. When this object is set to 'true', sychronization is enabled. When this object is set to 'false', synchronization is disabled.
- ccrSwitchTable
- There is an entry in this table for each slot that can hold a switch card. A 'switch card' is a card that contains the ATM switch fabric.
- ccrSwitchEntry
- Redundancy information for a switch card.
- ccrSwitchSlotIndex
- Identifies a chassis slot.
- ccrSwitchMode
- The redundancy mode of this switch card.
- ccrSwitchStatus
- The operational status of this switch card.
- ccrSwitchLastSwitchoverTime
- The value of sysUpTime at the last switchover of the switch cards. The value is zero if there was no switchover since agent initialization.
- ccrSwitchLastSwitchoverReason
- The reason for the last switch card switchover. The value is none(1) if there was no switchover since agent initialization.
- ccrSwitchBw
- The switching capacity (i.e., bandwidth) of the switch fabric. tenGbps(1) - 10 Gigabits/sec twentyGbps(2) - 20 Gigabits/sec. ::= { ccrSwitch 4 } SYNTAX INTEGER { tenGbps(1), twentyGbps(2) } MAX-ACCESS read-write STATUS current DESCRIPTION The desire ...
- ccrCpuMibGroup
- A collection of objects providing the ability to manage CPU card redundancy.
- ccrSwitchMibGroup
- A collection of objects providing the ability to manage Switch Fabric card redundancy.
- ccrCpuMibGroup1
- A collection of objects providing the ability to manage CPU card redundancy and redundancy feature for counter, enable password on secondary and switchover duration.
Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.
