CISCO-BSTUN-MIB

CISCO-BSTUN-MIB Download

MIBs list

The Cisco MIB for the Blocked Serial Tunneling protocol used to tunnel blocked serial protocols (e.g. BSC) between a Cisco router and another C isco router or host.

IPHost Network Monitor offer an easy way of SNMP monitoring your Cisco Servers, Routers, Switches, Bridges, Firewalls, Repeaters.

OID list for CISCO-BSTUN-MIB

bstunIPAddr
The configured IP address used by the BSTUN component in this router.
bstunLisnSap
The configured Listening SAP address used by the BSTUN component when routed via frame-relay local-ack in this router.
bstunPeerKeepaliveInterval
The time interval between keepalives in this router.
bstunPeerKeepaliveLimit
The number of keepalives which can be missed in a continuous interval before session declared down in this router.
bstunGroupTable
A table of entries representing BSTUN groups configured on the router. Each BSTUN-enabled interface is assigned to a BSTUN group, and packets can only travel between BSTUN-enabled interfaces in the same group.
bstunGroupEntry
Status and parameter values for a group.
bstunGroupIndex
The configured BSTUN group number. The significance of this number is that it must match the BSTUN group number configured in the router at the other end of the BSTUN tunnel.
bstunProtocolType
The protocol type for this BSTUN group.
bstunLocalAck
Indicates if the BSTUN connection is locally acknowledged. TRUE-> BSTUN connection is locally acknowledged FALSE-> BSTUN connection is not locally acknowledged ::= { bstunGroupEntry 3 } SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION The ...
bstunGroupUnroutableReceive
Count of frames received from a serial interface with an unsupported poll address. Note that there may be several ports configured within this bstun group; a non-zero value in this field indicates that a least one of these ports is receiving frames for wh ...
bstunPortTable
A list of BSTUN-enabled interfaces (ports).
bstunPortEntry
Status and parameter values for a BSTUN port.
bstunPortGroupNumber
The group number to which the bstun port belongs. Frames will only be routed to other ports (on this or another router) in the same bstun group. This group should match a bstunGroupIndex in the bstunGroupTable.
bstunPortDefaultPeerType
The type of identification of the remote default partner. (This is as configured with the 'route all' command.) If ip then the value is in bstunPortDefaultPeerIP; if serial or serialDirect then the value is in bstunPortDefaultPeerSerial.
bstunPortDefaultPeerIP
The ip address of the remote default BSTUN partner, for unrecognized addresses. 0.0.0.0 if partner address type is not ip.
bstunPortDefaultPeerSerial
If bstunRouteType is serial then this is the serial interface index of the point-to-point link to the remote partner; if bstunRouteType is serialDirect then the partner is in the local BSTUN. if bstunRouteType is ip then this field is 0.
bstunRouteTable
A table containing information about specific poll addresses. There is one table entry for each address configured by the BSTUN ROUTE command.
bstunRouteEntry
The information regarding a single poll address.
bstunRouteGroupIndex
The index of the BSTUN Group owning this station.
bstunRouteStationAddress
The poll address of the station. 256 indicates the ALL parameter on the STUN ROUTE command, which is the route for all unrecognized addresses.
bstunRouteType
The type of identification of the remote partner. If ip then the value is in bstunRouteIP; if serial or serialDirect then the value is in bstunRouteSerial; if bip or apip then the value is in bstunRouteIP, bstunRouteBIPLocalPort and bstunRouteBIPForeignPo ...
bstunRouteIP
The ip address of the remote BSTUN partner. 0.0.0.0 if partner address type is not ip.
bstunRouteSerial
If bstunRouteType is serial then this is the serial interface index of the point-to-point link to the remote partner; if bstunRouteType is serialDirect then the partner is in the local BSTUN. if bstunRouteType is ip then this field is 0.
bstunRoutePriority
The priority with which this station's traffic will be routed across the network.
bstunRoutePeerState
The state of the peer connection through the BSTUN tunnel.
bstunRouteRxPackets
Count of frames received from the serial interface with this station's address.
bstunRouteTxPackets
Count of frames transmitted at the serial interface with this station's address.
bstunRouteRxBytes
Count of bytes received from the serial interface with this station's address.
bstunRouteTxBytes
Count of bytes transmitted at the serial interface with this station's address.
bstunRouteDLCI
If bstunRouteType is serialFrameRelay or serialLLC2 then this is the frame relay dlci circuit used for the point-to-point link to the remote partner; if bstunRouteType is ip or serial then this field is 0.
bstunRouteRSAP
If bstunRouteType is serialLLC2 then this is the llc2 sap value used for the point-to-point link to the remote partner; if bstunRouteType is ip or serial or serialFrameRelay then this field is 0.
bstunLLC2Priority
If bstunRouteType is serialLLC2 then this is the llc2 priority used for the point-to-point link to the remote partner; if bstunRouteType is ip or serial or serialFrameRelay then this field is 0.
bstunRouteBIPPassive
Specifies whether the bip peer will wait for an inbound connection or actively connect to the remote peer.
bstunRouteBIPLocalPort
If bstunRouteType is bip then this is the local port used when connecting to the remote peer.
bstunRouteBIPForeignPort
If bstunRouteType is bip then this is the for port used to connect to the remote peer.
bstunRouteBIPDeviceStatus
If bstunRouteType is bip then this indicates the OR bit mask status of the mapped bisync device: if no bits are set, indicates that the bisync device is up and operational. Bit 0, if set, indicates that the bisync device is reporting an operation check e ...
bstunRouteAPIPHeaderVersion
Specifies the tunneling header format to use for APIP: v0, if set, indicates a 2 byte encapsulation header. The length of the header is included in the size of the sent packet. v1, if set, indicates a 2 byte encapsulation header. The length of the header ...
bstunGlobalGroup
A collection of objects providing global BSTUN information.
bstunGroupGroup
A collection of objects providing information about BSTUN groups .
bstunPortGroup
A collection of objects providing information about BSTUN enabled interfaces.
bstunRouteGroup
A collection of objects providing information about BSTUN defined routes.
bstunGlobalGroupRev1
A collection of objects providing global BSTUN information.
bstunRouteGroupRev1
A collection of objects providing information about BSTUN defined routes.
bstunRouteGroupRev2
A collection of objects providing information about BSTUN defined routes.
bstunRouteBipGroup
A objects providing information about BSTUN defined routes for BIP protocol.
bstunRoutePortsGroup
A objects providing port number informaton information about BSTUN defined routes for BIP and APIP protocols.
bstunRouteApipGroup
A objects providing information about BSTUN defined routes for APIP protocol.

Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.

MIBs list