CISCO-BRIDGE-EXT-MIB

CISCO-BRIDGE-EXT-MIB Download

MIBs list

A MIB module for extending BRIDGE-MIB specified in RFC 1493.

IPHost Network Monitor offer an easy way of SNMP monitoring your Cisco Servers, Routers, Switches, Bridges, Firewalls, Repeaters.

OID list for CISCO-BRIDGE-EXT-MIB

cbeDot1dTpGlobalAgingTime
The timeout period in seconds for aging out dynamically learned forwarding information at the device level. Setting this object value to zero will disable the aging out action globally except at the VLANs where cbeDot1dTpVlanAgingTime is configured. 802.1 ...
cbeDot1dTpVlanTable
This table provides the configuration for aging out dynamically learned forwarding information at each VLAN. This table is populated for each existing VLAN in the device as well as non-existing VLANs which have the aging out value configured.
cbeDot1dTpVlanEntry
Each entry contains the aging out configuration and the configuration source of the aging out value applied at each VLAN.
cbeDot1dTpVlanIndex
Indicates the VLAN number.
cbeDot1dTpVlanAgingTime
The timeout period in seconds for aging out dynamically learned forwarding information at this VLAN. Setting this object value to zero will disable the aging out action for this VLAN. 802.1D-1990 recommends a default of 300 seconds. This object provides t ...
cbeDot1dTpVlanAgingFromGlobal
Indicates whether the aging time applied at this VLAN is from cbeDot1dTpGlobalAgingTime object or not. true(1) indicates the aging time applied at this VLAN is from cbeDot1dTpGlobalAgingTime object. When true(1) is configured, value of cbeDot1dTpVlanAging ...
cbeDot1dTpVlanRowStatus
The status of this conceptual row entry. This object is used to manage creation and deletion of rows in this table. To create an entry, users set the value of this object to createAndGo(4). To delete an entry, users set the value of this object to destroy ...
cbeDot1dStaticTable
A table containing filtering information configured into the device by (local or network) management to specify the set of bridge ports within a specific range of bridge port number for a specific VLAN, to which frames received from specific ports and con ...
cbeDot1dStaticEntry
Each entry represents filtering information configured into the device by (local or network) management specifying the set of bridge ports within a specific range of bridge port number for a specific VLAN, to which frames received from a specific port and ...
cbeDot1dVlanIndex
The VLAN ID of a specific VLAN.
cbeDot1dStaticAddress
The destination MAC address in a frame to which this entry's filtering information applies. This object can take the value of a unicast address, a group address or the broadcast address.
cbeDot1dStaticReceivePort
Either the value '0', or the port number of the port from which a frame must be received in order for this entry's filtering information to apply. A value of zero indicates that this entry applies on all ports of the bridge for which there is no other app ...
cbeDot1dStaticPortRangeIndex
The index that uniquely identifies a particular range of bridge port number.
cbeDot1dStaticAllowedToGoTo
A set of ports in a specific VLAN, in a specific range of bridge port number, to which frames received from a specific port, destined for a specific MAC address are allowed to be forwarded. An entry in this table with the index value of cbeDot1dStaticPort ...
cbeDot1dStaticStatus
This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so differ from the following values. invalid(2) - writing this value to the object removes the corresponding entry. per ...
cbeDot1dVlanTable
A list of 802.1D access ports. Every access port that is currently associated with a bridge has a corresponding entry in this table.
cbeDot1dVlanEntry
An entry containing VLAN information for a particular 802.1D access port.
cbeDot1dVlanOperVlan
The VLAN-ID of the VLAN with which the access port is currently associated.
cbeDot1dTpGroup
A collection of objects providing timeout period for aging out of dynamically learned forwarding information at the device level.
cbeDot1dTpVlanGroup
A collection of objects providing timeout period for aging out of dynamically learned forwarding information at each VLAN.
cbeDot1dStaticGroup
A collection of objects for configuration of static filtering information.
cbeDot1dOperVlanGroup
A collection of objects to show the operational VLAN information on bridge ports.

Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.

MIBs list