CISCO-APPLIANCE-REDUNDANCY-MIB Download

carRedundancySyncInterval

Time interval at which the active and standby appliances are synchronized. Synchronization consists of incrementally backing up the data on the active appliance and restoring on the standby appliance.

carRedundancyCheckInterval

Time interval to check the availability status of each appliance. Both the active and standby appliances will check the status of each other in this time interval. If the standby appliance is not able to connect to the active appliance during this check, ...

carRedundancyState

The HA redundancy state of this appliance device.

carNotificationEnabled

Enable or disable HA switchover event notifications via SNMP.

carHAAddressTable

This table keeps the current configuration of the address information of the active and standby appliances. There is an entry in this table corresponding to each network interface that is configured for redundancy. Thus, the number of entries in this tabl ...

carHAAddressEntry

An entry containing address information for HA configuration on a network interface.

carHAAddrTableIndex

This index matches the interface number for which the Virtual IP configuration is maintained. For example, the Virtual IP configured on interface eth0 will be index 0. Entry for eth1 will be index 1,... and so on.

carVirtualAddressType

The type of address stored in carVirtualAddress.

carVirtualAddress

The virtual IP address configured for this interface. The type of this mib variable is defined in carVirtualAddressType. This address binds to the active appliance at all times. All the management requests should be made to this address.

carMyAddressType

The type of address stored in carMyAddress

carMyAddress

The IP address of the interface configured for this HA configuration in this appliance. The type of this mib variable is defined in carMyAddressType. Note this value will not be affected by switchover events.

carPeerAddressType

The type of address stored in carPeerAddress

carPeerAddress

The IP address of the interface configured for this HA configuration in the peer appliance. The type of this mib variable is defined in carPeerAddressType. Note this value will not be affected by switchover events.

carLastSwitchOverReason

Cause for the most recent switchover.

carLastSwitchOverTime

The local date and time when the last switchover event occurred and was logged to the system.

carTotalSwitchOvers

The number of all HA switchover events.

carMaxSwitchOverHistoryRecords

The maximun number of records to keep in carSwitchOverHistoryTable. New records will replace the old records on a first-in-first-out basis. A value of 0 indicates no history will be retained.

carSwitchOverHistoryTable

This table keeps an history of HA switchover events. The maximum number of records is equal or less than carMaxSwitchOverRecords.

carSwitchOverHistEntry

An entry containing information about a HA switchover event.

carSWHistTableIndex

An monotonically increasing number for the sole purpose of indexing entries. When it reaches maximum value, the agent sets it back to 1.

carSWHistActiveNodeAddressType

Represents the type of address stored in carSWHistActiveNodeAddress.

carSWHistActiveNodeAddress

The address of the active appliance after the switchover event. carSWHistActiveNodeAddressType specifies the type of this mib variable.

carSWHistStandbyNodeAddressType

Represents the type of address stored in carSWHistStandbyNodeAddress.

carSWHistStandbyNodeAddress

The address of the standby appliance after the switchover event. carSWHistStandbyNodeAddressType specifies the type of this mib variable.

carSWHistEventTime

The local date and time when the switchover event occurred and was logged to the system.

carSWHistEventReason

Cause of the switchover event.

ciscoHAConfigDataGroup

A collection of objects that enable the switchover event notification for the HA network elements.

ciscoHASwitchOverDataGroup

A collection of objects that record the switchover events for HA network elements.