CTRON-FDDI-STAT-MIB DEFINITIONS ::= BEGIN -- ctron-fddi-stat-mib.txt. -- Revision: 1.00.00 -- Date: February 5, 1996 -- Cabletron Systems, Inc. -- 35 Industrial Way, P.O. Box 5005 -- Rochester, NH 03867-0505 -- (603) 332-9400 -- support@ctron.com -- This module provides authoritative definitions for Cabletron's -- enterprise-specific connection MIB. -- -- This module will be extended, as needed. -- -- Cabletron Systems reserves the right to make changes in -- specification and other information contained in this document -- without prior notice. The reader should consult Cabletron Systems -- to determine whether any such changes have been made. -- -- In no event shall Cabletron Systems be liable for any incidental, -- indirect, special, or consequential damages whatsoever (including -- but not limited to lost profits) arising out of or related to this -- document or the information contained in it, even if Cabletron -- Systems has been advised of, known, or should have known, the -- possibility of such damages. -- -- Cabletron grants vendors, end-users, and other interested parties -- a non-exclusive license to use this Specification in connection -- with the management of Cabletron products. -- Copyright August 95 Cabletron Systems IMPORTS TimeTicks FROM RFC1155-SMI ctFDDIStats FROM CTRON-MIB-NAMES OBJECT-TYPE FROM RFC-1212; ctFDDIStatsUtil OBJECT IDENTIFIER ::= { ctFDDIStats 1 } ctFDDIStatsCtlTable OBJECT-TYPE SYNTAX SEQUENCE OF CtFDDIStatsCtlEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table allows control over the creation of FDDI utilization statistics. This is done by providing an object that when accessed latches the statistics into the stats table." ::= { ctFDDIStatsUtil 1 } ctFDDIStatsCtlEntry OBJECT-TYPE SYNTAX CtFDDIStatsCtlEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Defines a specific control entry." INDEX { ctFDDISlot, ctFDDISMT, ctFDDIPath } ::= { ctFDDIStatsCtlTable 1 } CtFDDIStatsCtlEntry ::= SEQUENCE { ctFDDISlot INTEGER, ctFDDISMT INTEGER, ctFDDIPath INTEGER, ctFDDINextEntry INTEGER, ctFDDIResetPeak INTEGER } ctFDDISlot OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A specific slot for which this connection entry is defined. If the entry corresponds to a slotless chassis system, then this entry will have the value of 0." ::= { ctFDDIStatsCtlEntry 1 } ctFDDISMT OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A specific instance of SMT for which this entry pertains." REFERENCE "The IETF RFC FDDI-SMT73-MIB, fddimibSMTIndex" ::= { ctFDDIStatsCtlEntry 2 } ctFDDIPath OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A specific FDDI Path that this connection entry pertains." REFERENCE "The IETF RFC FDDI-SMT73-MIB, fddimibPATHIndex" ::= { ctFDDIStatsCtlEntry 3 } ctFDDINextEntry OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Provides an identifier of the next entry to be used in the ctFDDIStatsHistoryTable. Reading this object will latch FDDI performance data into a conceptual row in the ctFDDIStatsHistoryTable indexed by the value just read from ctFDDINextEntry." ::= { ctFDDIStatsCtlEntry 4 } ctFDDIResetPeak OBJECT-TYPE SYNTAX INTEGER { normal(1), reset(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object provides the ability to reset the peak bytes and peak time stamp object. This is accomplished by setting this object with a value of reset(2). Setting a value of normal(1) will have no affect. When read this object will always return normal(1)." ::= { ctFDDIStatsCtlEntry 5 } ctFDDIStatsHistoryTable OBJECT-TYPE SYNTAX SEQUENCE OF CtFDDIStatsHistoryEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Provides a history of latched FDDI performance objects. There is one such object for each entry that has been latched in the ctFDDIStatsCtlTable. This table will contain the 10 most recent entries. All other entries will be lost." ::= { ctFDDIStatsUtil 2 } ctFDDIStatsHistoryEntry OBJECT-TYPE SYNTAX CtFDDIStatsHistoryEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { ctFDDISlot, ctFDDIStatsIndex } ::= { ctFDDIStatsHistoryTable 1 } CtFDDIStatsHistoryEntry ::= SEQUENCE { ctFDDIStatsIndex INTEGER, ctFDDIStatsTimeStamp TimeTicks, ctFDDIFrames INTEGER, ctFDDIBytes INTEGER, ctFDDIPeakBytes INTEGER, ctFDDIPeakTime INTEGER, ctFDDIStatsSMT INTEGER, ctFDDIStatsPath INTEGER } ctFDDIStatsIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A unique entry that identifies a particular latched stats entry. This corresponds directly to a value of ctFDDINextEntry." ::= { ctFDDIStatsHistoryEntry 1 } ctFDDIStatsTimeStamp OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "The value of sysUpTime when this entry was created." ::= { ctFDDIStatsHistoryEntry 2 } ctFDDIFrames OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The bandwidth utilization in frames per second." ::= { ctFDDIStatsHistoryEntry 3 } ctFDDIBytes OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The bandwidth utilization in bytes per second." ::= { ctFDDIStatsHistoryEntry 4 } ctFDDIPeakBytes OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The peak bandwidth utilization in bytes per second." ::= { ctFDDIStatsHistoryEntry 5 } ctFDDIPeakTime OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A time stamp when the peak occured." ::= { ctFDDIStatsHistoryEntry 6 } ctFDDIStatsSMT OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The FDDI SMT index for which these statistics pertain. The value of the object must match a corresponding value of ctFDDISMT." ::= { ctFDDIStatsHistoryEntry 7 } ctFDDIStatsPath OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The FDDI MAC path index for which these statistics pertain. The value of the object must match a corresponding value of ctFDDIPath." ::= { ctFDDIStatsHistoryEntry 8 } END